Manual
12
Chapter 1: Knowing your NAS
1.4 Hardware overview
1.4.1 Front view
Power button
(
with LED
)
HDD1 LED
HDD2 LED
Network LED
USB button (
with LED, for the
front USB 2.0 port only
)
• One Touch Copy
• USB unmount
USB 2.0 port
• One Touch Copy
• Folder sharing
Power button (
with LED
) • Press and hold until the power LED starts blinking blue to
turn NAS ON.
• Press and hold for more than ve seconds until the power
LED starts blinking blue to turn NAS OFF.
USB button
(
with LED, for the front USB 2.0
port only
)
• One Touch Copy
Press to copy data from the front USB 2.0 device to NAS.
See 5.3.2 Copying front USB data via One Touch Copy for
details.
• USB unmount
Press and hold for more than three seconds until the USB
LED turns OFF to unmount the front USB 2.0 device.
USB 2.0 port • One Touch Copy
Connect a USB 2.0 device such as a digital camera and USB
ash drive to this port and press the USB button to copy
data from it to NAS.
• Folder sharing
Connect a USB ash drive or USB HDD to this port to add
extra storage capacity for folder sharing.
Front buttons / ports
E6146_NAS-M25_Manual.indd 12 11/30/10 9:39:12 AM