Manual

18 Chapter 2: Setting up your NAS
* 3.5” hard disks vary in height. If your 3.5” hard disk’s height matches the NAS drive
bay’s height, follow the steps below.
2. Install the bundled hard disk handle on your hard disk.
3. Using the hard disk handle, push the hard disk into a drive bay until it is rmly
positioned.
4. Close the front panel and slide the front panel lock to (locked position).
IMPORTANT:
Ensure to slide the front panel lock back
to (locked position), otherwise the
NAS cannot be powered ON.
Hard disk handle
E6146_NAS-M25_Manual.indd 18 11/30/10 9:39:17 AM