User Guide
2-342-34
2-342-34
2-34
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware information
12.12.
12.12.
12.
ATX ATX
ATX ATX
ATX
power connectors (24-pin ATXPWR1,power connectors (24-pin ATXPWR1,
power connectors (24-pin ATXPWR1,power connectors (24-pin ATXPWR1,
power connectors (24-pin ATXPWR1,
8 8
8 8
8
-pin -pin
-pin -pin
-pin
ATX12V1ATX12V1
ATX12V1ATX12V1
ATX12V1
))
))
)
These connectors are for SSI power supply plugs. The power supply
plugs are designed to fit these connectors in only one orientation.
Find the proper orientation and push down firmly until the connectors
completely fit.
•
Use of an SSI 12 V Specification 2.0-compliant power supply unit
(PSU) that provides a minimum power of 450W is recommended for
a fully-configured system.
•
Do not forget to connect the 8-pin ATX +12 V power plug;
otherwise, the system will not boot up.
•
Use of a PSU with a higher power output is recommended when
configuring a system with more power consuming devices. The
system may become unstable or may not boot up if the power is
inadequate.
•
You must install a PSU with a higher power rating if you intend to
install additional devices.
®
NCL-DE Series
NCL-DE Series ATX power connectors
8-pin
GND12V
GND12V
GND12V
GND12V
For Power Supply
with 24-pin
Power Connector
24-pin Power Connector
+3 Volts
+3 Volts
Ground
+5 Volts
+5 Volts
Ground
Ground
Power OK
+5V Standby
+12 Volts
-5 Volts
+5 Volts
+3 Volts
-12 Volts
Ground
Ground
Ground
PSON#
Ground
+5 Volts
+12 Volts
+3 Volts
+5 Volts
Ground
ATXPWR1 ATX12V1