Founder Technology server user manual —for Founder Reminus MT100 1200 ( V1.
方正科技服务器用户使用手册 PREFACE Thank you for purchasing this product. This manual can guide you to proper operation and correct setting. Before connecting, operating or adjusting this product, please read this manual carefully for optimum performance and safety. ANNOUNCEMENT “方正”、“FOUNDER”、“圆明”、“圆明REMINUS”“FOUNDER Reminus” are registered trademarks of Founder Technology Group Corporation(“Foundertech”) or Foundertech’ s associations in the China.
方正科技服务器用户使用手册 CONTENTS 1 QUICKLY USE REMINUS MT100 1200 1.1 Choose Reminus MT100 1200 Working Environment 1 1 1.1.1 Space Requirement 1 1.1.2 Power Supply Requirement 1 1.2 Reminus MT100 1200 Sever Front Panel 2 1.3 Reminus MT100 1200 Server Rear Panel 3 1.4 Operation System 4 2 REMINUS MT100 1200 SPECIFICATION DESCRIPTION 5 2.1 Reminus MT100 1200 Sever Specification 5 2.2 Reminus MT100 1200 Serverboard Components 6 2.3 Reminus MT100 1200 CPU Subsystem 7 2.
方正科技服务器用户使用手册 3.2 Serverboard Jumper Settings 3.2.1 Setting a Jumper 14 14 3.3 Installing the CPU 15 3.4 Installing the Heatsink and Fan 17 3.5 Installing Memory 18 3.6 Installing a PCI Card 19 4 REMINUS MT100 1200 FIRMWARE 20 4.1 Reminus MT100 1200 BIOS Configuration 20 4.1.1 Reminus MT100 1200 BIOS Settings 20 4.
方正科技服务器用户使用手册
方正科技服务器用户使用手册 1 Quickly Use Reminus MT100 1200 1.1 Choose Reminus MT100 1200 Working Environment Reminus MT100 1200 Server 1.1.1 Space Requirement Spec Height Width ReminusMT100 1200 555mm 226mm Depth 493mm Space requirement 100mm 100mm front：300mm back：200mm 1.1.2 Power Supply Requirement Spec Voltage Current Frequency Standard 110V-220V 7.5A-3.5A 50Hz Limit 200V~230V 47Hz~63Hz 1.
方正科技服务器用户使用手册 Reminus MT100 1200 Server Front Panel No. A B C D E F G H I Description 5.25 inch Bays Power Button Reset Button Alert Reset HDD LED Lock of Chassis Door 3.5 inch Bays Front Panel Lock Power LED 1.
方正科技服务器用户使用手册 Reminus MT100 1200 Server Rear Panel No.
方正科技服务器用户使用手册 3 4 9 Keyboa rd USB LAN Port COM 11 VGA 12 13 LAN 14 5 7 6 8 10 port. Connect a PS/2 keyboard to this port. Use the USB ports to connect USB devices. 10 Mbps RJ-45 LAN port (for optional BMC card) Use the serial port COM1 to connect serial devices such as mice or fax/modems. Use the VGA port to connect an external monitor. 10/100/1000 Mbps RJ-45 LAN port (for onboard LAN chipset) 1.4 Operation System Reminus MT100 1200 server support OS： Windows 2003 Windows 2003 Red Hat Linux 9.
方正科技服务器用户使用手册 2 Reminus MT100 1200 Specification Description 2.1 Reminus MT100 1200 Sever Specification 2.
方正科技服务器用户使用手册 15 17 19 Label CPU1/2 DDR2 DDR_A1/B1 ,A2/B2, A3/B3 16 Component 18 604-pin CPU socket DDR2 DIMM sockets CLRTC1 FM_CPU1, FM_CPU2 Clear RTC RAM CPU fan pin selection USBPW12, USBPW34 USB device wake-up 20 Keyboard power VGA controller setting Gigabit LAN controller setting Force BIOS recovery setting KBPWR1 VGA_EN1 LAN_EN1/2 RECOVERY1
方正科技服务器用户使用手册 FLOPPY1 PRI_IDE, SEC_IDE Floppy disk drive connector Primary IDE connectors SATA1, SATA2 HDLED1 USB34 COM2 CPU_FAN1/2, REAR_FAN1/2, FRNT_FAN1/2 BMCCONN1 BPSMB1 PSUSMB1 ATXPWR1, 8-pin ATX12V1 PANEL1 AUX_PANEL1 Serial ATA connectors Hard disk activity LED connector USB connector Serial port connector CPU and system fan connectors BMC connector Backplane SMBus connector Power supply SMBus connector ATX power connectors System panel connector Auxiliary panel connector 2.
方正科技服务器用户使用手册 2.9 Reminus MT100 1200 Jumper Description 1.Clear RTC RAM (CLRTC1): This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords. To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Remove the onboard battery. 3.
方正科技服务器用户使用手册 3.USB device wake-up (3-pin USBPW12, USBPW34) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S4 sleep mode (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). 4.Keyboard power (3-pin KBPWR1) This jumper allows you to enable or disable the keyboard wake-up feature.
方正科技服务器用户使用手册 5.VGA controller setting (3-pin VGA_EN1) These jumpers allow you to enable or disable the onboard ATI RAGE-XL PCI VGA controller. Set to pins 1-2 to activate the VGA feature. 6.Gigabit LAN controller setting (3-pin LAN_EN1) This jumper allows you to enable or disable the onboard Broadcom® BCM5721 Gigabit LAN1 controller. Set to pins 1-2 to activate the Gigabit LAN feature.
方正科技服务器用户使用手册 7.Gigabit LAN controller setting (3-pin LAN_EN2) These jumpers allow you to enable or disable the onboard Broadcom® BCM5705E Gigabit LAN2 controller. Set to pins 1-2 to activate the Gigabit LAN feature. 8.Force BIOS recovery setting (3-pin RECOVERY1) This jumper allows you to quickly update or recover the BIOS settings when it becomes corrupted. To update the BIOS: 1. Prepare a floppy disk that contains the latest BIOS for the motherboard (xxxx-xxx.ROM) and the AFUDOS.EXE utility. 2.
方正科技服务器用户使用手册 3 Reminus MT100 1200 Hardware Installation 3.1 Safety Measures Computer components and electronic circuit boards can be damaged by discharges of static electricity. Working on computers that are still connected to a power supply can be extremely dangerous. Follow the simple guidelines below to avoid damage to your computer or yourself. Always disconnect the computer from the power outlet whenever you are working inside the computer case.
方正科技服务器用户使用手册
方正科技服务器用户使用手册 3.2 Serverboard Jumper Settings Refer to this section when setting the jumpers on the serverboard. 3.2.1 Setting a Jumper The serverboard jumpers are to set system configuration options. When setting jumpers, ensure the shunts (jumper caps) are placed on the correct pins. 1 This 2-pin jumper is ON/SHORT. This 2-pin jumper is OFF/OPEN. Pins 1 and 2 are ON/SHORT on this 3-pin jumper.
方正科技服务器用户使用手册
方正科技服务器用户使用手册 3.3 Installing the CPU Refer to the illustration for the location of the CPU sockets. 1 Important! When only installing one CPU, the CPU must be installed in CPU1. The system will not boot up with a single processor installed in CPU2. Follow these instructions to install the CPU: 1. Pull the locking lever of the CPU socket into the upright position. 2. Locate the pin-1 corner of the CPU and the pin-1 corner of the socket. 3. Align the pin-1 corners and drop the processor into the socket.
方正科技服务器用户使用手册 4. Swing the locking lever back down to lock the processor in place. 2 Important! The mPGA604, 604-pin socket is a ZIF socket (Zero Insertion Force socket). This type of socket is designed for easy insertion of the CPU. The chip is easily dropped into the socket, and the lever is pulled down to lock it in. If any resistance is noticed when inserting the CPU, check that it is aligned correctly.
方正科技服务器用户使用手册
方正科技服务器用户使用手册 3.4 Installing the Heatsink and Fan The Intel® Xeon™ processors require an Intel certified heatsink and fan assembly to ensure optimum thermal condition and performance. When you buy a boxed Intel CPU, the package includes the heatsink, fan, retention brackets, screws, thermal grease, installation manual, and other items that are necessary for CPU installation. To install the CPU heatsink and fan: 1.
方正科技服务器用户使用手册 4. Repeat steps 1 to 3 to install the other heatsink if you have installed a second CPU, then connect the fan cable to the 4-pin connector labeled CPU_FAN2. The heatsinks appear as shown when installed. 3.5 Installing Memory The serverboard has Six DDR-DIMM (Double Data Rate Dual In-line Memory Modules) slots for the installation of memory modules. The memory modules require 1.8V DDR SDRAM memory chips. Follow these instructions to install memory modules: 1.
方正科技服务器用户使用手册 direction. Do not force a DIMM into a socket to avoid damaging the DIMM. • The DDR2 DIMM sockets do not support DDR DIMMs. DO NOT install DDR DIMMs to the DDR2 DIMM sockets. 3.6 Installing a PCI Card Refer to the illustration for the location of the PCI slots. Follow these instructions to install a PCI card: 1. Remove a blanking plate from the system case. 2. Install the PCI card into the expansion slot. 3. Secure the metal bracket of the PCI card to the system case with a screw.
方正科技服务器用户使用手册 Setup Menu The computer employs the latest AMI BIOS CMOS chip with support for Windows Plug and Play. This CMOS chip contains the ROM Setup instructions for configuring the mainboard’s BIOS. The BIOS (Basic Input and Output System) Setup utility is a menu driven utility that enables you to make changes to the system configuration and tailor your system to suit your individual work needs.
方正科技服务器用户使用手册 System Time [xx:xx:xx] Allows you to set the system time. System Date [Day xx/xx/xxxx] Allows you to set the system date. Legacy Diskette A [1.44M, 3.5 in.] Sets the type of floppy drive installed. Configuration options: [Disabled] [360K, 5.25 in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.] [2. 88M, 3.5 in.] IDE Configuration The items in this menu allow you to set or change the configurations for the IDE devices installed in the system.
方正科技服务器用户使用手册 OS, e.g. Windows ME/98/NT, MS-DOS. Configuration options: [Compatible Mode] [Enhanced Mode] IDE Detect Time Out (Sec) [35] Selects the time our value (in seconds) for detecting ATA/ATAPI devices. Configuration options: [0] [5] [10] [15] [20] [25] [30] [35] Primary/Secondary IDE Master/Slave, Tertiary and Fourth IDE Master The BIOS automatically detects the connected IDE devices. There is a separate sub-menu for each IDE device.
方正科技服务器用户使用手册 data transfer from and to the device occurs multiple sectors at a time if the device supports multi-sector transfer feature. When set to [Disabled] , the data transfer from and to the device occurs one sector at a time. Configuration options: [Disabled] [Auto] PIO Mode [Auto] Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] Selects the DMA mode.
方正科技服务器用户使用手册 System Memory Information Displays the auto-detected information about the installed DDR2 DIMMs.
方正科技服务器用户使用手册 Advanced Menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Warning! Making incorrect settings to items on these pages may cause the system to malfunction. Unless you have experience adjusting these items, we recommend that you leave these settings at the default values.
方正科技服务器用户使用手册 Allows you to select the multi-processor system version. Configuration options: [1.1] [1.4] Hyper Threading Technology [Enabled] Allows you to enable or disable the processor Hyper-Threading Technology. Configuration options: [Disabled] [Enabled] Max CPUID Value Limit [Disabled] Setting this item to [Enabled] allows legacy operating systems to boot even without support for CPUs with extended CPUID functions.
方正科技服务器用户使用手册 controller. Configuration options: [Disabled] [Enabled] Adaptec AIC-7901x BOOTROM [Enabled] Allows you to enable or disable the option ROM in the onboard SCSI controller. Configuration options: [Disabled] [Enabled] NorthBridge Configuration The NorthBridge Configuration menu allows you to change the Northbridge related settings. Memory Remap Feature [Enabled] Allows you to remap the overlap PCI memory over the total physical memory.
方正科技服务器用户使用手册 Plug And Play O/S [No] When set to [No], BIOS configures all the devices in the system. When set to [Yes] and if you install a Plug and Play operating system, the operating system configures the Plug and Play devices not required for boot. Configuration options: [No] [Yes] PCI Latency Timer [64] Allows you to select the value in units of PCI clocks for the PCI device latency timer register.
方正科技服务器用户使用手册 for the ACPI and Advanced Power Management (APM) features. Select an item then press to display the configuration options. ACPI APIC Support [Enabled] Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI) support in the Application-Specific Integrated Circuit (ASIC). When set to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list.
方正科技服务器用户使用手册 Allows you to select the hard disk power down mode Configuration options: [Disabled] [Standby] [Suspend] Suspend Time Out (Minute) [Disabled] Allows you to select the specified time at which the system goes on suspend mode. Configuration options: [Disabled] [1 Min] [2 Min] [4 Min] [8 Min] [10 Min] [20 Min] [30 Min] [40 Min] [50 Min] [60 Min] Throttle Slow Clock Ratio [50%] Allows you to select duty cycle in throttle mode. Configuration options: [87.5%] [75.0%] [62.5%] [50.0%] [37.5%] [25.
方正科技服务器用户使用手册 The items in this menu allows you to change the USB-related features. Select an item then press to display the configuration options. USB Function [All USB Ports] Allows you to enable a specific number of USB ports, or disable the USB function. Configuration options: [Disabled] [2 USB Ports] [All USB Ports] Legacy USB Support [Auto] Allows you to enable or disable support for legacy USB devices.
方正科技服务器用户使用手册 Serial Port1 Address [3F8/IRQ4] Allows you to select the Serial Port1 base address. Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3] Serial Port2 Address [2F8/IRQ3] Allows you to select the Serial Port2 base address. Configuration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] Parallel Port Address [378] Allows you to select the Parallel Port base addresses.
方正科技服务器用户使用手册 CPU1/CPU2 Temperature [xxxºC/xxxºF] MB Temperature [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures. Select [Disabled] if you do not wish to display the detected temperatures. CPU1/CPU2 Fan Speed [xxxxRPM] or [N/A] Front1/Front2 Fan Speed [xxxxRPM] or [N/A] Rear1/Rear2 Fan Speed [xxxxRPM] or [N/A] The onboard hardware monitor automatically detects and displays the CPU, front, and rear fan speeds in rotations per minute (RPM).
方正科技服务器用户使用手册 Remote Access Configuration The items in this menu allows you to configure the Remote Access features. Select an item then press to display the configuration options. Remote Access [Enabled] Enables or disables the remote access feature. Setting this item to [Enabled] displays other connectivity items (see the screen below). Configuration options: [Disabled] [Enabled] Serial port number [COM1] Enables or disables the remote access feature.
方正科技服务器用户使用手册 settings. Select an item then press to display the configuration options. Change Supervisor Password Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen shows the default Not Installed Installed. After you set a password, this item shows Installed Installed. To set or change a supervisor password: 1. Select the Change Supervisor Password item, then press . 2.
方正科技服务器用户使用手册 User Access Level [Full Access] This item allows you to select the access restriction to the Setup items. Configuration options: [No Access] [View Only] [Limited] [Full Access] No Access prevents user access to the Setup utility. View Only allows access but does not allow change to any field. Limited allows changes only to selected fields, such as Date and Time. Full Access allows viewing and changing all the fields in the Setup utility.
方正科技服务器用户使用手册 Configuration options: [Setup] [Always] Boot The Boot menu items allow you to change the system boot options. Select an item then press to display the sub-menu. Boot Device Priority 1st Boot Device [1st FLOPPY DRIVE] 2nd Boot Device [MBA v7.6.6 Slot 02] 3rd Boot Device [MBA v7.6.6 Slot 04] These items specify the boot device priority sequence from the available devices. Configuration options: [1st FLOPPY DRIVE] [MBA v7.6.6 Slot 02] [MBA v7.6.
方正科技服务器用户使用手册 Quick Boot [Enabled] Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items. Configuration options: [Disabled] [Enabled] Full Logo display [Enabled] Allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled] Bootup Num-Lock [On] Allows you to select the power-on state for the NumLock.
方正科技服务器用户使用手册 Exit & Save Changes Select this option then press , or simply press , to save your changes to CMOS before exiting the Setup utility. When a confirmation window appears, select [OK] then press to save your changes and exit Setup. If you wish to cancel the command, select [Cancel] then press to return to the Exit menu. Exit & Discard Changes Select this option then press to exit the Setup utility without saving your changes.
方正科技服务器用户使用手册 4.2 Reminus MT100 1200 SCSI RAID1 Settings Power on, when screen display: Press Ctrl-C to start LSI Logic Configuration Utility... Press Ctrl-C to run SCSI RAID1 settings; Press ENTER, system will scan SCSI devices; Chose Mirroring Properties, after press ENTER system will display hard disks information; If you have two hard disks, use +/- key set two hard disks to Primary and Secondary, save and exit; If you have three hard disks, you may set the third hard disk to HOT Spare.
方正科技服务器用户使用手册 2、[Setup is Inspect your hardware……]， and press F6; a、[To specify additional SCSI adapters, CD-ROM drivers, or special disk controllers for use with Windows 2003 ……], press S b、[Please insert the disk labeled Manufacturer-supplied hardware support disk into Drive A:], press ENTER Choose [LSI Logic PCI SCSI/FC MPI Miniport Driver], press ENTER 3、[To set up Windows 2003 now], press ENTER 4、[Windows 2003 Licensing Agreement], press F8 5、[The following list shows the existing partitions and unpart
