User Guide
© Copyright 2012 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel is a trademark of Intel Corporation in the U.S. and other countries. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice.
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
iv Safety warning notice
Table of contents 1 Starting right ................................................................................................................................................... 1 Best practices ....................................................................................................................................... 1 Fun things to do .................................................................................................................................... 2 More HP resources ...
Connecting to a local area network (LAN) ......................................................................... 18 4 Enjoying entertainment features ................................................................................................................. 19 Using the webcam .............................................................................................................................. 20 Using audio ....................................................................................
Intel Rapid Start Technology (select models only) ............................................................ 35 Initiating and exiting Sleep ................................................................................................. 36 Enabling and Exiting User-Initiated Hibernation ................................................................ 36 Setting password protection on wakeup ............................................................................
9 Securing your computer and information .................................................................................................. 51 Using passwords ................................................................................................................................ 51 Setting Windows passwords .............................................................................................. 52 Setting Setup Utility (BIOS) passwords ..........................................................
Operating environment ....................................................................................................................... 68 13 Electrostatic Discharge .............................................................................................................................. 69 Index ...................................................................................................................................................................
x
1 Starting right This computer is a powerful tool designed to enhance your work and entertainment. Read this chapter to learn about best practices after setup, fun things to do with your computer, and where to get more HP resources. Best practices To get the most out of your smart investment, after you set up and register the computer, we recommend the following steps: ● Take a minute to browse the printed Windows 8 Basics guide to explore the new Windows® features.
Fun things to do 2 ● You know that you can watch a YouTube video on the computer. But did you know that you can also connect your computer to a TV or gaming console? For more information, see Connecting an HDMI device. ● You know you can listen to music on the computer. But did you know that you can also stream live radio to the computer and listen to music or talk radio from all over the world? See Using audio.
More HP resources You have already used Setup Instructions to turn on the computer and locate this guide. To locate product details, how-to information, and more, use this table. Resource Contents Setup Instructions ● Overview of computer setup and features. Windows 8 Basics guide ● Overview of using and navigating with Windows® 8. Help and Support ● A broad range of how-to information and troubleshooting tips. Safety & Comfort Guide ● Proper workstation setup.
2 Getting to know your computer Finding your hardware and software information Locating hardware To find out what hardware is installed on your computer: 1. From the Start screen, type c, and then select Control Panel. 2. Select System and Security, and then in the System area, click Device Manager. A list displays all the devices installed in your computer.
Right side Component (1) Description Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. (2) Audio-in (microphone) jack Connects an optional computer headset microphone, stereo array microphone, or monaural microphone. (3) Audio-out (headphone) jack Connects optional powered stereo speakers, headphones, earbuds, a headset, or a television audio cable.
Left side Component (1) Description RJ-45 network lights White: The network is connected Amber: Activity is occurring on the network (2) RJ-45 (network) jack Connects a network cable. (3) HDMI port Connects an optional video or audio device, such as a high-definition television, or any compatible digital or audio device. (4) USB 3.0 ports (2) Connect optional USB 3.0 devices and provide enhanced USB power performance.
Display Component Description (1) Turns off the display and initiates Sleep if the display is closed while the power is on. Internal display switch NOTE: The internal display switch is not visible from the outside of the computer. (2) WLAN antennas (2)* Send and receive wireless signals to communicate with wireless local area networks (WLANs). (3) Internal microphones (2) Record sound. (4) Webcam light On: The webcam is in use.
Top TouchPad Component 8 Description (1) TouchPad on/off button Turns the TouchPad on or off. (2) TouchPad light ● Amber: The TouchPad is off. ● Off: The TouchPad is on. (3) TouchPad zone Moves the on-screen pointer and selects or activates items on the screen. (4) Left TouchPad button Functions like the left button on an external mouse. (5) Right TouchPad button Functions like the right button on an external mouse.
Lights Component (1) Description Power light ● White: The computer is on. ● Blinking white: The computer is in the Sleep state, which is an energy-saving mode. The computer shuts off power to the display and other unneeded components. ● Off: The computer is off or in Hibernation. Hibernation is an energy-saving mode that uses the least amount of power. NOTE: For select models, the Intel® Rapid Start Technology feature is enabled at the factory.
Component Description (4) Caps lock light On: Caps lock is on, which switches the keys to all capital letters. (5) TouchPad light ● On: The TouchPad is off. ● Off: The TouchPad is on. Button, speakers, and subwoofer Component (1) Description Power button ● When the computer is off, press the button to turn on the computer. ● When the computer is in the Sleep state, press the button briefly to exit Sleep.
Component Description (2) Speakers (2) Produce sound. (3) HP Triple Bass Reflex Subwoofer Provides superior bass sound. Keys Component Description (1) esc key Displays system information when pressed in combination with the fn key. (2) fn key ● Displays system information when pressed in combination with the esc key. ● Enables or disables Beats Audio in combination with the b key. (3) Windows logo key Displays the Windows Start screen.
Bottom Component Description Vents (2) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation.
Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer. The labels are in easily accessible locations. ● Service label—Provides important information, including the following: NOTE: Your label may look slightly different from the illustration in this section.
3 Connecting to a network Wireless technology transfers data across radio waves instead of wires. Your computer may be equipped with one or more of the following wireless devices: ● Wireless local area network (WLAN) device—Connects the computer to wireless local area networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities.
Using the wireless controls You can control the wireless devices in your computer using these features: ● Wireless button, wireless switch, or wireless key (referred to in this chapter as the wireless button) ● Operating system controls Using the wireless button The computer has a wireless button, one or more wireless devices, and one or two wireless lights, depending on the model.
Using an Internet service provider When you are setting up Internet access in your home, you must establish an account with an Internet service provider (ISP). To purchase Internet service and a modem, contact a local ISP. The ISP will help set up the modem, install a network cable to connect your wireless router to the modem, and test the Internet service. NOTE: Your ISP will give you a user ID and a password to use for Internet access. Record this information and store it in a safe place.
Wireless radio signals travel outside the network, so other WLAN devices can pick up unprotected signals. Take the following precautions to protect your WLAN: ● Use a firewall. A firewall checks both data and requests for data that are sent to your network, and discards any suspicious items. Firewalls are available in both software and hardware. Some networks use a combination of both types. ● Use wireless encryption.
● Audio devices (headset, speakers) ● Mouse Bluetooth devices provide peer-to-peer capability that allows you to set up a personal area network (PAN) of Bluetooth devices. For information about configuring and using Bluetooth devices, see the Bluetooth software Help. Connecting to a wired network There are 2 kinds of wired connections: local area network (LAN) and modem connection. A LAN connection uses a network cable and is much faster than a modem, which uses a telephone cable.
4 Enjoying entertainment features Use your HP computer as an entertainment hub to socialize via the webcam, enjoy and manage your music, and download and watch movies. Or, to make your computer an even more powerful entertainment center, connect external devices like speakers, headphones, monitor, projector, TV, and, on select models, high-definition devices. Multimedia Features Here are some of the entertainment features on your computer.
Component (3) Description HP TrueVision HD Webcam Records video, captures still photographs, allows you to video conference and chat online using streaming video. From the Start screen, type c, and then select CyberLink YouCam from the list of applications. (4) USB 2.0 charging port Connects an optional USB device. The USB 2.0 charging port can also charge select models of cell phones and MP3 players, even when the computer is off.
For details about using the webcam go to Help and Support. From the Start screen, type h, and then select Help and Support. Using audio On your HP computer, you can play music CDs, download and listen to music, stream audio content from the web (including radio), record audio, or mix audio and video to create multimedia. To enhance your listening enjoyment, attach external audio devices such as speakers or headphones.
Checking the sound To check the audio functions on your computer, follow these steps: 1. From the Start screen, type c, and then select Control Panel from the list of applications. 2. Select Hardware and Sound > Sound. 3. When the Sound window opens, select the Sounds tab. Under Program Events, select any sound event, such as a beep or alarm, and then click Test. You should hear sound through the speakers or through connected headphones.
To connect a high-definition TV or monitor to your computer: 1. Connect one end of the HDMI cable to the HDMI port on the computer. 2. Connect the other end of the cable to the high-definition TV or monitor. 3. Press f4 to alternate the computer screen image between 4 display states: ● PC screen only: View the screen image on the computer only. ● Duplicate: View the screen image simultaneously on both the computer and external device.
To return the audio stream to the computer speakers, follow these steps: 1. On the Windows Desktop, right-click the Speakers and Headphones icon in the notification area, at the far right of the taskbar, and then click Playback devices. 2. On the Playback tab, click Speakers. 3. Click Set Default, and then click OK.
5 Navigating using touch gestures, pointing devices and the keyboard Your computer allows navigation using touch gestures (select models only) in addition to the keyboard and mouse. Touch gestures can be used on your computer TouchPad or on a touch screen (select models only). NOTE: An external USB mouse (purchased separately) can be connected to one of the USB ports on the computer. Review the Windows 8 Basics guide included with your computer.
Using the TouchPad The TouchPad allows you to navigate the computer with simple finger movements. You can customize the touch gestures by changing settings, button configurations, click speed, and pointer options. From the Start screen, type c to display the Apps list. Select Control Panel, and then select Hardware and Sound. Under Devices and Printers, select Mouse. Turning the TouchPad off or on To turn the TouchPad off or on, quickly double-tap the TouchPad on/off button.
Tapping To make an on-screen selection, use the tap function on the TouchPad. ● Point to an item on the screen and then tap one finger on the TouchPad zone to make a selection. Double-tap an item to open it. NOTE: Tap and hold your finger on the TouchPad to open a help screen that provides information about the selected item. Scrolling Scrolling is useful for moving up, down, or sideways on a page or image.
Pinching/zooming Pinching and zooming allow you to zoom out or in on images or text. ● Zoom in or out by placing two fingers together on the TouchPad zone and then moving your fingers apart. ● Zoom in by placing two fingers apart on the TouchPad zone and then moving your fingers together. Rotating (select models only) Rotating allows you to turn items such as photos. ● Point to an object, then anchor the forefinger of your left hand in the TouchPad zone.
2-finger click (select models only) 2-finger click allows you to make menu selections for an object on the screen. ● Place two fingers on the TouchPad zone and press down to open the options menu for the selected object. Flicking (select models only) Flicking allows you to navigate through screens or quickly scroll through documents. ● Place three fingers on the TouchPad zone and flick your fingers in a light, quick motion up, down, left or right.
Right-edge swipe The right-edge swipe reveals the charms, which let you search, share, start apps, access devices, or change settings. ● Slide your finger gently from the right edge to display the charms. Top-edge swipe The left-edge swipe reveals your open apps so that you can switch to them quickly. IMPORTANT: ● 30 When an app is active, the top-edge gesture varies depending on the app. Slide your finger gently from the top edge to display available apps.
Left-edge swipe The left-edge swipe reveals your open apps so that you can switch to them quickly. ● Swipe from the left edge of the TouchPad to switch between apps.
Using the keyboard and mouse The keyboard and mouse allow you to type, select items, scroll and to perform the same functions as you do by using touch gestures. The keyboard also allows you to use action keys and hot keys to perform specific functions TIP: The Windows logo key on the keyboard allows you to quickly return to the Start screen from an open app or the Windows Desktop. Pressing the Windows logo key again will return you to the previous screen.
Icon Key Description f3 Increases the screen brightness incrementally as long as you hold down the key. f4 Switches the screen image between display devices connected to the system. For example, if a monitor is connected to the computer, pressing this key alternates the screen image from the computer display to the monitor display to a simultaneous display on both the computer and the monitor. Most external monitors receive video information from the computer using the external VGA video standard.
Shortcut key Key Description + d Opens the Windows Desktop. + tab Switches between open apps. NOTE: Continue to press this key combination until the app you want displays. alt + f4 Closes an active app. Using the hot keys A hot key is a combination of the fn key and the esc key or the b key. To use a hot key: ▲ Briefly press the fn key, and then briefly press the second key of the combination. Function Hot key Description Display system information.
6 Managing power Your computer can operate on either battery power or external power. When the computer is only running on battery power and an AC power source is not available to charge the battery, it is important to monitor and conserve the battery charge. Your computer supports power plans to manage how your computer uses and conserves power so that you can balance computer performance with power conservation.
After Hibernation is initiated, press the power button to resume your work. NOTE: Rapid Start Technology can be disabled in Setup Utility (BIOS). If Rapid Start Technology is disabled and you want to be able to initiate the Hibernation state, you must enable user-initiated Hibernation using Power Options. See Enabling and Exiting User-Initiated Hibernation on page 36. Initiating and exiting Sleep With the computer on, you can initiate Sleep in any of the following ways: ● Close the display.
Setting password protection on wakeup To set the computer to prompt for a password when the computer exits Sleep or Hibernation, follow these steps: 1. From the Start screen, type power, then select Settings, and then select Power Options. 2. Click Hardware and Sound, and then click Power Options. 3. In the left pane, click Require a password on wakeup. 4. Click Change Settings that are currently unavailable. 5. Click Require a password (recommended).
Using the power meter and power settings The power meter is located on the Windows Desktop. The power meter allows you to quickly access power settings and view the remaining battery charge. ● To display the percentage of remaining battery charge and the current power plan, on the Windows Desktop, point over the power meter icon. ● To use Power Options, or to change the power plan, click the power meter icon and select an item from the list.
Running on battery power When a charged battery is in the computer and the computer is not plugged into external power, the computer runs on battery power. If the computer has a charged battery installed and the AC adapter is disconnected from the computer, the computer automatically switches to battery power and the display brightness decreases to conserve battery life. The battery in the computer slowly discharges when the computer is off and unplugged from external power.
– or – ● The power meter icon on the Windows Desktop shows a low or critical battery notification. NOTE: For additional information about the power meter, refer to “Using the power meter” section. The computer takes the following actions for a critical battery level: ● If Hibernation is disabled and the computer is on or in the Sleep state, the computer remains briefly in the Sleep state, and then shuts down and loses any unsaved information.
● When running Disk Defragmenter on computers with internal hard drives ● When performing a backup or recovery When you connect the computer to external AC power: ● The battery begins to charge. ● The display brightness increases. ● The power meter icon on the Windows Desktop changes appearance. When you disconnect external AC power, the following events occur: ● The computer switches to battery power. ● The display brightness automatically decreases to save battery life.
When HP CoolSense is off, the position of the computer is not detected and the performance and fan options remain at the factory setting. As a result, the surface temperature of the computer may be higher than it would be with HP CoolSense on. To turn CoolSense off or on, follow these steps: ▲ From the Start screen, type cool, select Settings, and then select HP CoolSense.
7 Managing and sharing information Drives are digital storage devices or solid-state drives that help you store, manage, share, and access information. Your computer has an internal hard drive that stores your computer's software, operating system, as well as providing storage for all of your personal files. Some computers also have a built-in optical drive that allows you to read or write to a CD, DVD, or (on select models) Bluray Disc (BD), to play and record audio and video.
▲ Connect the USB cable for the device to the USB port. NOTE: The USB port on your computer may look slightly different from the illustration in this section. NOTE: The first time you connect a USB device, a message in the notification area lets you know that the device is recognized by the computer. Removing a USB device CAUTION: To reduce the risk of damage to a USB connector, do not pull on the cable to remove the USB device.
Inserting and removing a digital storage card To insert a digital storage card: CAUTION: To reduce the risk of damage to the digital card connectors, use minimal force to insert a digital card. 1. Hold the card label-side up, with the connectors facing the computer. 2. Insert the card into the digital storage slot, and then press in on the card until it is firmly seated.
Sharing data and drives and accessing software When your computer is part of a network, you are not limited to using only the information that is stored in your computer. Network computers can exchange software and data with each other. NOTE: When a disc like a DVD movie or game is copy-protected, it cannot be shared. To share on the same network: 1. From the Windows Desktop, select File Explorer. 2. Click the Share tab on the Libraries window, and then click Specific people. 3.
8 Maintaining your computer It is important to perform regular maintenance to keep your computer in optimal condition. This chapter provides information about improving the performance of your computer by running tools such as Disk Defragmenter and Disk Cleanup and by replacing a hard drive or adding memory. It also provides information about updating your programs and drivers, instructions for cleaning your computer, and tips for travelling with your computer.
● Do not type on the keyboard or move the computer while an optical drive is writing to a disc. The write process is sensitive to vibration. ● Before you move a computer that is connected to an external hard drive, initiate Sleep and allow the screen to clear, or properly disconnect the external hard drive. Using Disk Defragmenter As you use your computer over time, the files on the hard drive become fragmented.
Download the latest versions of HP programs and drivers. For U.S. support, go to http://www.hp.com/ go/contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html. In addition, register to receive automatic update notifications when they become available. Cleaning your computer Cleaning your computer and external devices helps keep them in good working condition. If you don't clean your computer, dust and dirt particles can build up.
Traveling with or shipping your computer If you have to travel with or ship your computer, here are some tips to keep in mind to keep your equipment safe. ● Prepare the computer for traveling or shipping: ◦ Back up your information to an external drive. ◦ Remove all discs and all external media cards, such as digital storage cards, from the computer. ◦ Turn off, and then disconnect all external devices. ◦ Remove any media from the drive before removing the drive from a drive bay.
9 Securing your computer and information Computer security is essential for protecting the confidentiality, integrity, and availability of your information. Standard security solutions provided by the Windows operating system, HP applications, the non-Windows Setup Utility (BIOS), and other third-party software can help protect your computer from a variety of risks, such as viruses, worms, and other types of malicious code.
● Change your passwords at least every three months. ● An ideal password is long and has letters, punctuation, symbols, and numbers. ● Before you send your computer for service, back up your files, delete confidential files, and then remove all password settings. For additional information about Windows passwords, such as screen-saver passwords, from the Start screen, type h, and then select Help and Support from the list of applications.
To set, change, or delete an administrator or power-on password in Setup Utility (BIOS): 1. To start Setup Utility (BIOS), turn on or restart the computer, and then quickly press f10. 2. Select Security, and then follow the on-screen instructions. Your changes take effect when the computer restarts. Using Internet security software When you use your computer to access email, a network, or the Internet, you potentially expose your computer to computer viruses, spyware, and other online threats.
security breaches and computer viruses, install all critical updates from Microsoft as soon as you receive an alert. To be sure that all available updates are installed on the computer, observe these guidelines: ● Run Windows Update as soon as possible after you set up your computer. From the Start screen, type w, and then type Windows update in the search box. Select Windows Update from the list of applications. ● Run Windows Update monthly thereafter.
3. Insert the security cable lock into the security cable slot on the computer (3), and then lock the security cable lock with the key. 4. Remove the key and keep it in a safe place.
10 Using Setup Utility (BIOS) and System Diagnostics Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility (BIOS) includes settings for the types of devices installed, the startup sequence of the computer, and the amount of system and extended memory.
Downloading a BIOS update CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download and install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do not download or install a BIOS update while the computer is running on battery power, docked in an optional docking device, or connected to an optional power source.
Using System Diagnostics System Diagnostics allows you to run diagnostic tests to determine if the computer hardware is functioning properly. To start System Diagnostics: 1. Turn on or restart the computer, and then quickly press f2. 2. Click the diagnostic test you want to run, and then follow the on-screen instructions. NOTE: 58 If you need to stop a diagnostic test while it is running, press esc.
11 Backing up, restoring, and recovering Your computer includes tools provided by HP and the operating system to help you safeguard your information and retrieve it if ever needed. These tools will help you return your computer to a proper working state or even back to the original factory state, all with simple steps.
Creating recovery media and backups Recovery after a system failure is only as good as your most recent backup. 1. After you successfully set up the computer, create HP Recovery media. HP Recovery media is a backup of the HP Recovery partition on the computer. It can be used to reinstall the original operating system in cases where the hard drive is corrupted or has been replaced.
What you need to know ● Only one set of HP Recovery media can be created. Handle these recovery tools carefully, and keep them in a safe place. ● HP Recovery Manager examines the computer and determines the required storage capacity for the blank USB flash drive or the number of blank DVD discs that will be required. ● To create recovery discs, your computer must have an optical drive with DVD writer capability, and you must use only high-quality blank DVD-R, DVD+R, DVD-R DL, DVD+R DL discs.
Restore and recovery There are several options for recovering from potential problems. The method used depends on your situation and level of expertise: ● If you need to restore your personal files and data, you can use Windows File History to restore the backups you created. For more information and steps for using File History, see Windows Help and Support. From the Start screen, type h, and then select Help and Support.
Using Windows Refresh for quick and easy recovery When your computer is not working properly and you need to regain system stability, the Windows Refresh option allows you to start fresh and keep what is important to you. IMPORTANT: Refresh removes any Windows Desktop apps that were not originally installed on the system at the factory. NOTE: During Refresh, a list of removed Windows Desktop apps will be saved to your Windows Desktop so you have a quick way to see what you might need to reinstall.
To remove everything and reinstall Windows from the Start screen: 1. On the Start screen, point to the far-right upper or lower corner of the screen to display charms. 2. Click Settings. 3. Click Change PC settings in the bottom right corner of the screen, and then select General from the PC settings screen. 4. Under Remove everything and reinstall Windows, select Get started, and follow the onscreen instructions.
To start HP Recovery Manager from the HP Recovery partition: 1. Press f11 while the computer boots. —Or— Press and hold f11 as you press the power button. 2. Select Troubleshoot from the boot options menu. 3. Select HP Recovery Manager, and follow the on-screen instructions. Using HP Recovery media to recover You can use HP Recovery media to recover the original system. This method can be used if your system does not have an HP Recovery partition or if the hard drive is not working properly. 1.
Removing the HP Recovery partition HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space. IMPORTANT: Removing the HP Recovery partition means you can no longer use Windows Refresh, the Windows Remove everything and reinstall Windows option, or the HP Recovery Manager option for minimized image recovery. Create HP Recovery media before removing the Recovery partition to ensure you have recovery options; see Creating HP Recovery media on page 60.
12 Specifications Input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100–240 V, 50–60 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this computer.
Operating environment Factor Metric U.S.
13 Electrostatic Discharge Electrostatic discharge is the release of static electricity when two objects come into contact—for example, the shock you receive when you walk across the carpet and touch a metal door knob. A discharge of static electricity from fingers or other electrostatic conductors may damage electronic components.
Index Symbols/Numerics 2–finger click 29 A AC adapter 5 AC adapter, testing 41 action keys 33 decrease screen brightness 32 Help and Support 32 identifying 11 increase screen brightness 33 next track or section 33 play, pause, resume 33 previous track or section 33 switch screen image 33 volume down 33 volume mute 33 volume up 33 wireless 33 airport security devices 47 antivirus software, using 53 audio functions, checking 22 audio-in (microphone) jack 5 audio-out (headphone) jacks 5 B back up personal fil
HP and third-party software updates, installing 54 HP Recovery Manager 64 correcting boot problems 65 starting 65 HP Recovery media creating 60 recovery 65 HP Recovery partition 65 recovery 64 removing 66 hubs 43 I input power 67 installing critical security updates 53 optional security cable lock 54 integrated webcam light, identifying 7, 20 internal display switch, identifying 7 internal microphones, identifying 7, 19 Internet connection setup 16 Internet security software, using 53 J jacks audio-in (micr
Sleep exiting 36 initiating 36 slots Digital Media 6 security cable 5 software CyberLink PowerDVD 24 Disk Cleanup 48 Disk Defragmenter 48 software updates, installing 53 speakers, identifying 11, 20 supported discs recovery 61 system information hot key 34 system recovery 64 system restore point creating 60 restoring 62 T testing an AC adapter 41 TouchPad buttons 8 TouchPad gestures 29 flicking 29 pinching 28 rotating 28 scrolling 27 zooming 28 TouchPad light 8 TouchPad on/off button 8 TouchPad zone, identi
