User Manual

25
2.16.1 Signal Tables for Headers and Connectors
This section more clearly defines the pinouts and connector types used in Table 7.
A – EPS 8 Pin Power Connector
The EPS 8 Pin Power Connector follows the ATX standard layout and requirements. With one
side being Ground and the opposite side with the connector lock being 12V. The NUC 11
Extreme Compute element can utilize 12-19V input, while the NUC 11 Extreme Kit provides the
standard ATX 12V.
B - Internal USB 3.1 Gen 2 Type-C 20pin Header (Key B)
C, Internal USB 3.1 Gen 2 Type-C 20pin
Header (Key B)
Pin Number
Signal
Pin Number
Signal
1
Ground
11
Ground
2
TX1+
12
TX2-
3
TX1-
13
TX2+
4
Ground
14
Ground
5
RX1+
15
RX2-
6
RX1-
16
RX2+
7
Ground
17
Ground
8
D1+
18
D2+
9
D1-
19
D2-
10
VBUS
20
VBUS
C - Internal USB 3.2 Gen 2 Type-C 20pin Header (Key A)
C, Internal USB 3.2 Gen 2 Type-C 20pin
Header (Key A)
Pin Number
Signal
Pin Number
Signal
1
VBUS
11
VBUS
2
TX1+
12
TX2+
3
TX1-
13
TX2-
4
Ground
14
Ground
5
RX1+
15
RX2+
6
RX1-
16
RX2-