User Manual

28
2.17.1 Signal Tables for Headers and Connectors
This section more clearly defines the pinouts and connector types used in Table 7.
A – EPS 8 Pin Power Connector
The EPS 8 Pin Power Connector follows the ATX standard layout and requirements. With one
side being Ground and the opposite side with the connector lock being 12V. The NUC 12
Extreme / Pro X Compute element can utilize 12-19V input, while the NUC 12 Extreme / Pro X Kit
provides the standard ATX 12V.
B - Internal USB 3.1 Gen 2 Type-C 20pin Header (Key B)
C, Internal USB 3.1 Gen 2 Type-C 20pin
Header (Key B)
Pin Number
Signal
Pin Number
Signal
1
Ground
11
Ground
2
TX1+
12
TX2-
3
TX1-
13
TX2+
4
Ground
14
Ground
5
RX1+
15
RX2-
6
RX1-
16
RX2+
7
Ground
17
Ground
8
D1+
18
D2+
9
D1-
19
D2-
10
VBUS
20
VBUS
C - Internal USB 3.2 Gen 2 Type-C 20pin Header (Key A)
C, Internal USB 3.2 Gen 2 Type-C 20pin
Header (Key A)
Pin Number
Signal
Pin Number
Signal
1
VBUS
11
VBUS
2
TX1+
12
TX2+
3
TX1-
13
TX2-
4
Ground
14
Ground
5
RX1+
15
RX2+
6
RX1-
16
RX2-