User Guide
Page 30 of 37
In
t
el
®
N
U
C
P
ro
So
ft
w
a
re
S
u
i
t
e
-
U
s
er Gu
id
e
6.
Perform the same steps for each Display or NUC and click Next.
7.
The display will show the message “Enable Persistent Display Emulation on NUC” as the display is not registered with the
specific NUC.
8.
To avoid display connectivity interruptions without the operating system redetecting and rearranging the display layout, enable
the Persistent Display emulation in NUC.
9.
For detailed steps to enable or disable the persistent display, refer to Section 5.1.2.1 Persistent Display Emulation.
10.
Enable the persistent display emulation for Display A and the screen will load the data from the NUC
Note: If the user connects the port 2 of Display A to HDMI 2 of 1.22 NUC (used for making primary connection) as shown in the
below example:
❖
The dotted line is a secondary connection, whereas the solid lines are a primary connection.