User`s manual

P/I-P55TP4N User's Manual

III. INSTALLATION

Jumpers

1) JP4 p. 8 Multi-I/O Selection (Enable/Disable)

2) JP5 p. 8 Flash ROM Boot Block Program (Enable/Disable)

3) JP16 p. 9 Total Level 2 Cache Size Setting

4) JP22, 23, 24 p. 9 Voltage Regulator Output Selection

5) JP26, 27, 28 p. 10 CPU External Clock (BUS) Frequency Selection

6) JP14, 15 p. 10 CPU:BUS Frequency Ratio

7) JP7 p. 11 PS/2 Mouse on IRQ12 (Enable/Disable)

8) JP13 p. 11 CMOS RAM (Operation/Clear CMOS Data)

Expansion Slots

1) SIMM Slots p. 12 DRAM Memory Expansion slots

2) Cache Expansion p. 14 Socket for Pipelined Burst SRAM Cache Module

3) CPU ZIF Socket 7 p. 15 Socket for Central Processing Unit (CPU)

4) ISA Slots 1,2,3 p. 16 16-bit ISA Bus Expansion slots

5) PCI Slots 1,2,3 p. 16 32-bit PCI Bus Expansion slots

6) PCI 4 / MediaBus p. 18 32-bit PCI Bus Slot and MediaBus

Connectors

1) Keyboard p. 19 Keyboard connector (5-pin Female)

2) PS/2 Mouse p. 19 PS/2 Mouse connector (6-pin Block)

3) Parallel Port p. 20 Parallel Port connector (26-pin Block)

4) Serial Port p. 20 Serial Port COM1 & COM2 (10-pin Blocks)

5) Floppy Drive p. 21 Floppy Drive connector (34-pin Block)

6) Power Input p. 21 Motherboard Power connector (12-pin Block)

7) Primary/Second IDE p. 22 Primary/Secondary IDE connector (40-pin Blocks)

8) JP30 (Fan) p. 22 CPU 12V Cooling Fan connector

9) Turbo/Power (CON1) p. 23 Turbo LED/Power LED (2-pins)

10) SMI Switch (CON1) p. 23 SMI Switch lead (2-pins)

11) Reset Switch (CON1) p. 23 Reset Switch lead (2-pins)

12) Key Lock (CON1) p. 23 Keyboard Lock Switch lead (5-pins)

13) Speaker (CON1) p. 23 Speaker connector (4-pins)

14) JP17 (LED) p. 24 IDE LED activity light

16) JP31 (IR) p. 24 Infrared Port Module connector

(Map of Board)

III. INSTALLATION