User Manual

ASUS P/I-P65UP8 User’s Manual 13

III. INSTALLATION

(Jumpers)

Jumper Settings

1. i960 Bridge Setting

The secondary PCI slots can function as standard PCI slots when the i960 is set

to “Bridge” mode. When the i960 is set to “I2O” mode, the secondary PCI slots

are controlled by the i960 and only intelligent I/O (I2O) cards can be used on the

secondary PCI slots. Additional memory is required for the “I2O” mode.

960SEL Setting

I20 [1-2]

Bridge [2-3]

i960 Setting

I20

Bridge

960SEL

Caution! The jumper numbering is reversed

2. i960 Local DRAM RAS Setting

When the i960 is set to I20, the i960 chip acts as a processor and at least one

SIMM memory module is required. When using a single memory module, this

jumper does not need setting. When using two memory modules, this jumper

needs to be set according to the number of sides used by the chips mounted on

the memory modules.

DRAMRAS Setting

Single Sided DRAM [1-2]

Double Sided DRAM [2-3]

DRAM RAS Setting

Single Sided

DRAMS

Double Sided

DRAMS

DRAMRAS