User Guide

ASUS P10S-E/4L
2-21
2.6 Onboard LEDs
1. Standby Power LED (SBPWR1)
 ThemotherboardcomeswithastandbypowerLED.ThegreenLEDlightsupto
indicatethatthesystemisON,insleepmode,orinsoft-offmode.Thisisareminder
thatyoushouldshutdownthesystemandunplugthepowercablebeforeremovingor
plugging in any motherboard component. The illustration below shows the location of
theonboardLED.
2. Baseboard Management Controller LED (BMCLED1)
 ThegreenheartbeatLEDblinkspersecondtoindicatethattheASMB8isworking
normally.TheBMCLEDworkswiththeASUSASMB8managementdeviceand
indicatesitsinitiationstatus.WhenthePSUispluggedandthesystemisOFF,ASUS
ASMB8managementdevicestartssysteminitiationforaboutone(1)minute.TheBMC
LEDblinksaftersysteminitiationnishes.
• TheheartbeatLEDfunctionsonlywhenyouinstalltheASUSASMB8Management
card.
• EverytimeaftertheACpowerisreplugged,youhavetowaitforabout60secondsfor
the system to power up.