User Manual
Table Of Contents
- 目錄
- 安全性須知
- 限用物質名稱及含量列表
- 關於這本使用手冊
- P10S WS 規格概要
- 產品包裝
- 建立 PC 系統所需的其他工具與元件
- 第一章:產品介紹
- 第二章:硬體裝置資訊
- 第三章:BIOS 程式設定
- 3.1 認識 BIOS 程式
- 3.2 BIOS 程式設定
- 3.3 我的最愛(My Favorites)
- 3.4 主選單(Main)
- 3.5 Ai Tweaker 選單
- 3.6 進階選單(Advanced)
- 3.6.1 處理器設定(CPU Configuration)
- 3.6.2 平台各項設定(Platform Misc Configuration)
- 3.6.3 系統代理設定(System Agent Configuration)
- 3.6.4 PCH 設定(PCH Configuration)
- 3.6.5 PCH 儲存裝置設定(PCH Storage Configuration)
- 3.6.6 USB 裝置設定(USB Configuration)
- 3.6.7 網路協議堆疊設定(Network Stack Configuration)
- 3.6.8 內建裝置設定(OnBoard Devices Configuration)
- 3.6.9 進階電源管理設定(APM Configuration)
- 3.6.10 HDD/SSD SMART Information
- 3.7 監控選單(Monitor)
- 3.8 開機選單(Boot)
- 3.9 工具選單(Tool)
- 3.10 離開 BIOS 程式(Exit)
- 3.11 更新 BIOS 程式
- 第四章:軟體支援
- 第五章:RAID 支援
- 第六章:多繪圖處理技術支援
- 附錄
3-28
第三章:BIOS 程式設定
第三章
PCIE Native Power Management [Disabled]
本項目用來提升 PCI Express 的省電功能及作業系統的 ASPM 功能。設定值有:
[Disabled] [Enabled]。
Native ASPM [Disabled]
[Enabled] 由 Windows Vista 作業系統控制裝置的 ASPM 支援。
[Disabled] 由 BIOS 控制裝置的 ASPM 支援。
以下項目只有在 PCI Express Native Power Management 設定為 [Enabled]
時才會出現。
PCH - PCI Express 選項
DMI Link ASPM Control [Disabled]
本項目用來設定 DMI Link 上北橋與南橋的 ASPM(Active State Power
Management)功能。設定值有:[Disabled] [Enabled]。
ASPM Support [Disabled]
本項目用來選擇 ASPM state 的節能狀態。設定值有:[Disabled] [L0s] [L1] [L0sL1]
[Auto]。
SA - PCI Express 選項
DMI Link ASPM Control [Disabled]
本項目用來設定 DMI Link 上 CPU 與 PCH 的 ASPM(Active State Power
Management)功能。在 CPU 與 PCH 中的 ASPM Control 都要設定為開機才能使
ASPM 功能生效。設定值有:[Disabled] [L1]。
PEG ASPM [Disabled]
本項目用來選擇 ASPM state 的節能狀態,或使用華碩最佳化節能設定。設定值
有:[Disabled] [Auto] [ASPM L0s] [ASPM L1] [ASPM L0sL1]。