User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- Chapter 3: BIOS Setup
- Chapter 4: Software Support
- Chapter 5: RAID Support
- 5.1 RAID configurations
- 5.1.1 RAID definitions
- 5.1.2 Installing Serial ATA hard disks
- 5.1.3 Setting the RAID item in BIOS
- 5.1.4 Intel® Rapid Storage Technology enterprise SATA Option ROM Utility
- 5.1.5 Creating a RAID set
- 5.1.6 Deleting a RAID set
- 5.1.7 Resetting disks to Non-RAID
- 5.1.8 Exiting the Intel® Rapid Storage Technology enterprise SATA Option ROM utility
- 5.1.9 Rebuilding the RAID
- 5.1.10 Setting the Boot array in the BIOS Setup Utility
- 5.2 Intel® Rapid Storage Technology enterprise (Windows)
- 5.1 RAID configurations
- Chapter 6: Multi GPU Support
- Appendix
ASUS P10S WS
3-17
Chapter 3
ODT RTT PARK (CHB) [Auto]
Conguration options: [Auto] [0 DRAM CLOCK] [34 DRAM CLOCK]
[40 DRAM CLOCK] [48 DRAM CLOCK] [60 DRAM CLOCK] [80 DRAM
CLOCK] [120 DRAM CLOCK] [240 DRAM CLOCK]
ODT RTT NOM (CHB) [Auto]
Conguration options: [Auto] [0 DRAM CLOCK] [34 DRAM CLOCK]
[40 DRAM CLOCK] [48 DRAM CLOCK] [60 DRAM CLOCK] [80 DRAM
CLOCK] [120 DRAM CLOCK] [240 DRAM CLOCK]
ODT_READ_DURATION [Auto]
Conguration options: [Auto] [0] - [7]
ODT_READ_DELAY [Auto]
Conguration options: [Auto] [0] - [7]
ODT_WRITE_DURATION [Auto]
Conguration options: [Auto] [0] - [7]
ODT_WRITE_DELAY [Auto]
Conguration options: [Auto] [0] - [7]
Data Rising Slope [Auto]
Conguration options: [Auto] [0] - [15]
Data Rising Slope Offset [Auto]
Conguration options: [Auto] [0] - [1]
CMD Rising Slope [Auto]
Conguration options: [Auto] [0] - [15]
CMD Rising Slope Offset [Auto]
Conguration options: [Auto] [0] - [1]
Ctl Rising Slope [Auto]
Conguration options: [Auto] [0] - [15]
Ctl Rising Slope Offset [Auto]
Conguration options: [Auto] [0] - [1]
Clk Rising Slope [Auto]
Conguration options: [Auto] [0] - [15]
Clk Rising Slope Offset [Auto]
Conguration options: [Auto] [0] - [1]
Data Falling Slope [Auto]
Conguration options: [Auto] [0] - [15]
Data Falling Slope Offset [Auto]
Conguration options: [Auto] [0] - [1]
CMD Falling Slope [Auto]
Conguration options: [Auto] [0] - [15]
CMD Falling Slope Offset [Auto]
Conguration options: [Auto] [0] - [1]
Ctl Falling Slope [Auto]
Conguration options: [Auto] [0] - [15]
Ctl Falling Slope Offset [Auto]
Conguration options: [Auto] [0] - [1]