User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- Chapter 3: Powering Up
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Advanced menu
- 4.4.1 CPU Configuration
- 4.4.2 Power & Performance
- 4.4.3 Server ME Configuration
- 4.4.4 System Event Log
- 4.4.5 Trusted Computing
- 4.4.6 Redfish Host Interface Settings
- 4.4.7 Onboard LAN Configuration
- 4.4.8 Serial Port Console Redirection
- 4.4.9 Intel TXT Information
- 4.4.10 SIO Configuration
- 4.4.11 PCI Subsystem Settings
- 4.4.12 USB Configuration
- 4.4.13 Network Stack Configuration
- 4.4.14 CSM (Compatibility Support Module)
- 4.4.15 NVMe Configuration
- 4.4.16 APM Configuration
- 4.4.17 Third-party UEFI driver configurations
- 4.5 Chipset menu
- 4.6 Security menu
- 4.7 Boot menu
- 4.8 Monitor menu
- 4.9 Tool menu
- 4.10 Event Logs menu
- 4.11 Server Mgmt menu
- 4.12 Exit menu
- Chapter 5: RAID Configuration
- Chapter 6: Driver Installation
- Appendix
4-36
Chapter 4: BIOS Setup
SATA 1
Port 1 [Enabled]
Allows you to enable or disable the SATA port.
Configuration options: [Disabled] [Enabled]
SATA6G_1 Hot Plug [Disabled]
Allows you to enable or disable this port as hot pluggable.
Configuration options: [Disabled] [Enabled]
Spin Up Device [Disabled]
Allows you to enable or disable Spin Up Device. If enabled for any of the ports,
Staggered Spin Up will be performed and only the drives which have this option
enabled will spin up at boot. Otherwise all drives spin up at boot.
Configuration options: [Disabled] [Enabled]
SATA Device Type [Hard Disk Drive]
Allows you to identify the SATA port is connected to a solid state drive or a hard disk
drive
Configuration options: [Hard Disk Drive] [Solid State Drive]
SATA 2
Port 2 [Enabled]
Allows you to enable or disable the SATA port.
Configuration options: [Disabled] [Enabled]
SATA6G_2 Hot Plug [Disabled]
Allows you to enable or disable this port as hot pluggable.
Configuration options: [Disabled] [Enabled]
Spin Up Device [Disabled]
Allows you to enable or disable Spin Up Device. If enabled for any of the ports,
Staggered Spin Up will be performed and only the drives which have this option
enabled will spin up at boot. Otherwise all drives spin up at boot.
Configuration options: [Disabled] [Enabled]
SATA Device Type [Hard Disk Drive]
Allows you to identify the SATA port is connected to a solid state drive or a hard disk
drive
Configuration options: [Hard Disk Drive] [Solid State Drive]
SATA 3
Port 3 [Enabled]
Allows you to enable or disable the SATA port.
Configuration options: [Disabled] [Enabled]
SATA6G_3 Hot Plug [Disabled]
Allows you to enable or disable this port as hot pluggable.
Configuration options: [Disabled] [Enabled]
Spin Up Device [Disabled]
Allows you to enable or disable Spin Up Device. If enabled for any of the ports,
Staggered Spin Up will be performed and only the drives which have this option
enabled will spin up at boot. Otherwise all drives spin up at boot.
Configuration options: [Disabled] [Enabled]