User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- Chapter 3: Powering Up
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Advanced menu
- 4.4.1 CPU Configuration
- 4.4.2 Power & Performance
- 4.4.3 Server ME Configuration
- 4.4.4 System Event Log
- 4.4.5 Trusted Computing
- 4.4.6 Redfish Host Interface Settings
- 4.4.7 Onboard LAN Configuration
- 4.4.8 Serial Port Console Redirection
- 4.4.9 Intel TXT Information
- 4.4.10 SIO Configuration
- 4.4.11 PCI Subsystem Settings
- 4.4.12 USB Configuration
- 4.4.13 Network Stack Configuration
- 4.4.14 CSM (Compatibility Support Module)
- 4.4.15 NVMe Configuration
- 4.4.16 APM Configuration
- 4.4.17 Third-party UEFI driver configurations
- 4.5 Chipset menu
- 4.6 Security menu
- 4.7 Boot menu
- 4.8 Monitor menu
- 4.9 Tool menu
- 4.10 Event Logs menu
- 4.11 Server Mgmt menu
- 4.12 Exit menu
- Chapter 5: RAID Configuration
- Chapter 6: Driver Installation
- Appendix
2-32
Chapter 2: Hardware Information
1. Video Graphics Adapter port.
This port is for a VGA monitor or other VGA-compatible
devices.
2. RJ-45 port for iKVM.
This RJ-45 port functions only when you enable ASMB10
Management card.
3. USB 3.2 Gen 2 ports 1 and 2.
These two 4-pin USB ports are available for connecting
USB 3.2 Gen 2 devices.
4.
RJ-45 ports for Intel
®
LOM X710AT
LAN 1-2.
These ports allows Gigabit connection
to a Local Area Network (LAN) through a network hub. Refer to the table below for the
LAN port LED indications.
5.
HDMI
™
port.
The HDMI
™
(High Definition Multimedia Interface) port supports a Full-HD
device such as an LCD TV or monitor to allow viewing on a larger external display.
6.
Q-Code LED:
The Q-Code LED provides a 2-digit display that shows the status of your
system. Refer to the
Q-Code table
of this user guide for more information about the
2-digit codes.
7.
Power-on Button:
Press this button to turn on the system.
P12R-M/10G-2T