User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- Chapter 3: Powering Up
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Advanced menu
- 4.4.1 CPU Configuration
- 4.4.2 Power & Performance
- 4.4.3 Server ME Configuration
- 4.4.4 System Event Log
- 4.4.5 Trusted Computing
- 4.4.6 Redfish Host Interface Settings
- 4.4.7 Onboard LAN Configuration
- 4.4.8 Serial Port Console Redirection
- 4.4.9 Intel TXT Information
- 4.4.10 SIO Configuration
- 4.4.11 PCI Subsystem Settings
- 4.4.12 USB Configuration
- 4.4.13 Network Stack Configuration
- 4.4.14 CSM (Compatibility Support Module)
- 4.4.15 NVMe Configuration
- 4.4.16 APM Configuration
- 4.4.17 Third-party UEFI driver configurations
- 4.5 Chipset menu
- 4.6 Security menu
- 4.7 Boot menu
- 4.8 Monitor menu
- 4.9 Tool menu
- 4.10 Event Logs menu
- 4.11 Server Mgmt menu
- 4.12 Exit menu
- Chapter 5: RAID Configuration
- Chapter 6: Driver Installation
- Appendix
4-12
Chapter 4: BIOS Setup
4.4.2 Power & Performance
AVX [Enabled]
Allows you to enable or disable the AVX 2/3 Instructions. This is applicable for Big Core only.
Configuration options: [Disabled] [Enabled]
AVX3 [Enabled]
Allows you to enable or disable the AVX 3 Instructions. This is applicable for Big Core only.
Configuration options: [Disabled] [Enabled]
Active Processor Cores [All]
Allows you to set the number of cores to enable in each processor package.
Configuration options: [All] [1] [2] [3]
Hyper-Threading [Enabled]
Allows a hyper-threading processor to appear as two logical processors, allowing the
operating system to schedule two threads or processes simultaneously.
[Enabled] For two threads per activated core.
[Disabled] For only one thread per activated core.
BIST [Disabled]
Allows you to enable or disable BIST (Built-In Self Test) on reset.
Configuration options: [Disabled] [Enabled]
AES [Enabled]
Allows you to enable or disable AES (Advanced Encryption Standard).
Configuration options: [Disabled] [Enabled]
Intel Trusted Execution Technology [Disabled]
Allows you to enable or disable utilization of additional hardware capabilities provided by
Intel(R) Trusted Execution Technology. Changes require a full power cycle to take effect.
Configuration options: [Disabled] [Enabled]
CPU - Power Management Control
Boot performance mode [Turbo Performance]
This item allows you to select the performance state that the BIOS will set starting from reset
vector.
Configuration options: [Max Battery] [Max Non-Turbo Performance] [Turbo Performance]
Intel(R) SpeedStep(tm) [Enabled]
Allows more than two frequency ranges to be supported.
Configuration options: [Disabled] [Enabled]