English Pundit P3-PH4/P3-PH5 ASUS PC (Desktop Barebone) Installation Manual Download the latest manual from the ASUS website: www.asus.
Front panel features English Close Open Optical drive eject button Front panel cover Memory Stick®/ Pro™card slot SmartMedia® card slot Card reader LED Optical drive bay cover Secure Digital™/ MultimediaCard slot CompactFlash® card slot HDD LED Power LED Power button Headphone port Microphone port IEEE 1394a port Press to open the front panel cover USB 2.
English Internal components 1 12 13 10 3 9 11 2 8 7 6 1. 2. 3. 4. 5. 6. 4 5 5.25-inch empty optical drive bay Front panel cover Optical drive lock Hard disk drive bays Hard disk drive lock Power supply unit 7. 8. 9. 10. 11. 12. 13. PCI Express x1 slot PCI slots PCI Express x16 slot ASUS motherboard Metal bracket lock LGA775 socket DIMM sockets Selecting the voltage The system’s power supply unit has a 115 V/230 V voltage selector switch located beside the power connector.
Removing the cover Locate two cover screws. 2. Remove the cover screws. 3. Pull the cover. 4. Lift the cover, then set aside. 5. Lift the expansion card lock to a 90º-100º angle. 6. Lift the chassis support bracket, then remove. English 1. Removing the front panel assembly 1. 2. Locate the front panel assembly hooks. Pull the hooks outward to remove.
1. Locate the CPU socket. 2. Unlock the load lever. English Installing a CPU A B Retention tab Load lever 3. Lift the load lever. 4. Lift the load plate. 5. Carefully push the PnP cap from the load plate window to remove. 6. Install the CPU, noting the position of the gold triangle as shown.
English 7. Close the load plate. 8. Lock the load lever. Installing the CPU fan and heatsink assembly 1. Place the heatsink on top of the installed CPU. 2. Drive four screws into the fan holes to secure the fan to the motherboard. 3. Connect the CPU fan cable. Installing a DIMM 1. 2. 3. Locate the DIMM sockets in the motherboard. 2 Unlock a DIMM socket by pressing the retaining clips outward. Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket.
1. Remove the metal cover opposite the slot that you intend to use. 2. Insert the card connector to the slot, then press the card firmly until it fits in place. English Installing an expansion card Installing an optical drive 1. Drive a screw on the top right screw hole on both sides of the drive. 3. Push the drive all the way into the bay until the drive lock clicks. 4. 2. Connect the IDE and audio cable at the back of the drive.
3. Place the HDD on the tray. 4. English When the HDD screws align, push the drive on the bay. HDD screw lock Replacing the covers 1. Replace the front panel assembly. 2. Reinstall the metal chassis support and the expansion card lock. 3. Insert the cover hooks to the holes on the chassis side. 4. Push the cover to the direction of the front panel, then replace the cover screws.