User Guide

100 ASUS P3B-F User’s Manual
7. APPENDIX
7. APPENDIX
UltraDMA66 PCI Card
Windows 98
1. After installing the UltraDMA/66 controller card and configuring the
hard drive(s), partition and format your hard drive(s), if necessary.
2. Install Windows 98 normally.
3. After installation, click the “Start” menu and choose “Settings.”
4. From the “Settings” menu, choose “Control Panel.”
5. In the “Control Panel” window, double-click on the “System” icon.
6. In the “System” window, choose the “Device Manager” tab.
7. In the hierarchical display under “Other Devices” is a listing for “PCI
Mass Storage Controller.” Choose it and then press the “Properties”
button.
8. Choose the “Driver” tab in the “Properties” window, choose “Update
Driver,” and then press “Next.”
9. Choose “Search for a better driver than the one your device is Using
now (recommended),” then press “Next.”
10. Choose “Specify Location,” and then type “A:\” in the text box.
11. Insert the “UltraDMA/66 Driver” diskette into the A: drive.
12. Press the “Next” button. A message informing you that Windows has
found “UltraDMA/66 IDE Controller” will appear.
13. Press “Next,” then “Finish,” then “Yes” when asked if you want to
restart your computer. Be sure to remove the diskette from drive A:.