User Guide

102 ASUS P3B-F User’s Manual
7. APPENDIX
7. APPENDIX
UltraDMA66 PCI Card
Windows 98
1. After installing the UltraDMA/66 controller card and configuring the
hard drives, power up the system and boot Windows.
2. The “Add New Hardware Wizard” will appear, informing you that it
has found a “PCI Mass Storage Controller.”
3. Click on “Next,” and from the generated list box, choose “Search for a
better driver than the one your device is using now.”
4. Click on “Next,” and from the generated choices, choose “Specify a
location.”
5. Type “A:\” in the text box that appears.
6. Insert the “UltraDMA/66 Driver” diskette in drive A:.
7. Click on “Next.” A message informing you that Windows has found
“UltraDMA/66 IDE Controller” should appear.
8. Click on “Next,” and then on “Finish.”
9. Choose “Yes” when asked if you want to restart your computer. Be
sure to eject the diskette from drive A:.
Driver Confirmation
To confirm that the driver has been properly loaded, choose “Settings” from
the “Start” menu. Choose “Control Panel,” and then double-click on the “Sys-
tem” icon. Choose the “Device Manager” tab, and then click the “+” in front of
“SCSI controllers.” “ULTRADMA/66 IDE controller” could appear.