User Guide

104 ASUS P3B-F User’s Manual
7. APPENDIX
7. APPENDIX
UltraDMA66 PCI Card
Installing Drivers with Existing Windows NT 3.51
NOTE: Hard drives should not be connected to the UltraDMA/66 controller card
before performing the following procedure. The UltraDMA/66 drivers must be loaded
on the system hard drive (running under the existing hard drive controller) before
any hard drives are connected to the UltraDMA/66 controller card. See “Hard Drive
Installation” for more details.
1. In “Program Manager,” double-click on “Windows NT Setup” in the
“Main” group.
2. In “Windows NT Setup,” select “Options,” and then choose “Add/Re-
move SCSI Adapters…”
3. In “SCSI Adapter Setup,” press “Add…”
4. In “Select SCSI Adapter Option,” select “Other (requires a disk from a
hardware manufacturer)” in the “Adapter:” dialog box.
5. The “Insert Diskette” box will appear. Insert the “Windows NT3.51
UltraDMA/66 Drivers” (created from the “UltraDMA/66 Drivers” dis-
kette; see “Windows NT” for more details) diskette into drive A: and
type “a:\” in the dialog box.
6. The “Select OEM Option” dialog box will appear. Select “UltraDMA/
66 Controller,” and then press “OK.”
7. The “Select SCSI Adapter Option” will appear. Press “Install.”
8. After successfully installing the driver, the “SCSI Adapter Setup” dia-
log box will show that the “UltraDMA/66Controller” has been installed.