User Guide

20 ASUS P3C2000 User’s Manual

3. HARDWARE SETUP

Motherboard Settings

3. H/W SETUP

5) Onboard Audio CODEC Setting (AUD_EN1 / AUD_EN2)

(available on audio model only)

The onboard audio CODEC may be enabled or disabled using all of these jump-

ers. Disable the onboard audio CODEC if you are using an ISA or PCI audio

card on any of the expansion slots or a primary AMR on the AMR slot (see AMR

Slot later in this section). If using an ISA or PCI audio expansion card, On-

board AC97 Audio Controller in 4.4.2 I/O Device Configuration must also be

disabled.

P3C2000 Audio Codec Setting

DisableEnable

(Default)

AUD_EN1

AUD_EN2

123

AUD_EN1

AUD_EN2

P3C2000

JP5

6) AMR Bus Setting (ADN#)

This jumper allows you to select the AMR bus to be Primary Codec or Second-

ary Codec. If onboard audio codec is enabled, Secondary Codec must be se-

lected; otherwise, select Primary Codec if the onboard audio CODEC is dis-

abled.

P3C2000

JP5

P3C2000 AMR Bus Setting

Secondary

Codec

(Default)

Primary

Codec

123

ADN#