User Guide

LED projector E-Manual

Using ASUS WiFi Projection

Using this mode, you can establish a connection between your input

device and your LED projector.

1. Connect the Wi-Fi dongle to your LED projector to launch the

Media Center

2. Select ASUS WiFi Projection.

NOTE: If the Media Center does not automatically launch, press

then select WiFi>ASUS WiFi Projection.

3. Enable the WiFi connection in your input device. Select ASUS-

P3B (default SSID) or the new SSID you congured for the P3B

LED projector.

NOTE: You may also refer to the steps presented onscreen.

4. Type the password on your input device as shown on the LED

projector to enable the connection.