Installation guide

Porta SIP

Installation Process

Step 7: STUN Feature and RADIUS

Configuration – Parameters

If you set the STUN feature, you should have two IP addresses ready for

network configuration. You can set the checkbox for the STUN feature

using the space bar.

Parameter Description

RADIUS server IP address of the PB100 master host.

RADIUS secret Authentication key for all radius interactions; select

a password and write it down, as you will need to

enter it later when adding the PortaSIP node to

your PB100 system.

RADIUS auth

port

Number of the UDP port on which your

PortaBilling100 accepts authorization requests.

RADIUS acct

port

Number of the UDP port on which your

PortaBilling100 accepts accounting requests.

RADIUS

retransmission

interval

Number of seconds to wait for a reply before

retransmitting a RADIUS request.

RADIUS

retransmission

count

Maximum number of retransmissions.

NOTE: Only RADIUS server and RADIUS key are mandatory parameters. You can

simply leave the default values for the last four parameters.