Installation guide

Porta SIP

Installation Process

Step 8: Network Configuration

Fill in the appropriate fields for network configuration in this menu.

Use the space bar to set the check box for Interfaces and DHCP. Use the

Tab key to proceed to the next field. If you have multiple interfaces, set at

least one of the interfaces on which your machine connects to the

Internet. If you do not use DHCP, unset this box. You can leave the alias

and ifconfig(8) flags field empty.

However, if you set the STUN feature in the previous screen, you must

fill in the alias IP field for the selected interface, or choose a secondary

interface and fill in the IPv4 address for it. If you fail to do so, you will be

prompted to reconfigure the network as shown below: