Installation guide

Installation Process

Before proceeding any further, you will see the following screen:

If you select the first option, installation will start in default mode, which

is suitable for most hardware configurations. However, in some cases,

option 1 will return a device mounting error due to hardware conflicts. In

this case, restart installation and, when you see this screen again, select

options 2, 3 or both to enable/disable APIC/ACPI features.

For example, if you are installing to a computer with an ASUS P4VP-MX

motherboard, you must disable APIC. In this case, select 2 on the screen

above. You will then be shown the disabled features and asked to press 1

or Enter to proceed, as shown in the screen below: