Installation guide

Installation Process

Step 7: Hardware Check

After you have selected the installation type, the system will check your

server’s hardware components, such as CPU, memory, network card and

USB controller.

If the hardware test detects a failure, an output message is generated

indicating what exactly went wrong when failure occurred.

Step 8: PortaSwitch Parameters

Parameter Description

RADIUS server IP address of the PB100 master host.

RADIUS secret Authentication key for all radius interactions; select

a password and write it down, as you will need to

enter it later when adding the PortaSIP node to

your PB100 system.

RADIUS auth

port

Number of the UDP port on which your

PortaBilling100 accepts authorization requests

RADIUS acct

port

Number of the UDP port on which your

PortaBilling100 accepts accounting requests.

RADIUS

retransmission

interval

Number of seconds to wait for a reply before

retransmitting a RADIUS request.

RADIUS

retransmission

count

Maximum number of retransmissions.

NOTE: Only RADIUS server and RADIUS key are mandatory parameters. You can

simply leave the default values for the last four parameters.