Installation guide

Installation Process

server is physically located, or the one which is local to the majority of

system administrators.

Step 11: Disk Partitioning - Overview

Now you must allocate the hard drive partitions where FreeBSD and

PortaUM will be installed. If you have only one hard drive in your system,

or have configured your available disks as a single volume array, go to step

13 directly. Otherwise, choose the designated disk in step 12.

Step 12: Disk Partitioning - Choose Disk

If you have more than one disk in your system, you will have to choose

which disk you would like to create the FreeBSD partitions on. If in

doubt, choose the first disk in the list.

NOTE: Installation is always performed on a single disk. If you want to utilize multiple

drives (e.g. install the DB on a separate disk), this can be done after installation.