Installation guide

Installation Process

Step 1: Insert USB Dongle

Before you start the installation, insert the USB dongle provided into one

of the available USB ports. It must remain in place the whole time to

ensure normal system operation.

Step 2: Power-up, Boot Order Setup

Turn on the computer which you plan to use as the server. Enter the

BIOS setup and make sure that:

• the CD-ROM is first in the list of boot devices

• USB support is enabled

If you are installing a dual-server configuration, start your installation with

the master server.

NOTE: This image is only an example. The BIOS on your system might look different.

Save your changes and exit.