P535 Podręcznik użytkownika
Pol2755 Wydanie pierwsze Styczeń 2007 Copyright © 2007 ASUSTeK COMPUTER INC. Wszelkie prawa zastrzeżone. Żadnej z części tego podręcznika, włącznie z opisem produktów i oprogramowania, nie można powielać, przenosić, przetwarzać, przechowywać w systemie odzyskiwania danych lub tłumaczyć na inne języki, w jakiejkolwiek formie lub w jakikolwiek sposób, za wyjątkiem wykonywania kopii zapasowej dokumentacji otrzymanej od dostawcy, bez wyraźnego, pisemnego pozwolenia ASUSTeK COMPUTER INC. (“ASUS”).
SPIS TREŚCI Specyfikacje P535................................................................................... 8 Zawartość opakowania.......................................................................... 9 Rozdział 1: Poznanie budowy P535............................................... 12 Układ ............................................................................................................. 12 Opis komponentów urządzenia......................................................................
Rozdział 2: Wprowadzanie danych Używanie panelu wprowadzania........................................................ 28 Używanie klawiatury ekranowej ................................................................... 28 Pisanie i rysowanie na ekranie............................................................ 29 Nagrywanie głosu................................................................................. 30 Używanie programu ActiveSync™......................................................
Rozdział 4: Funkcje bezprzewodowe Używanie programu Wireless Manager.............................................. 50 Używanie Bluetooth®...................................................................................... 51 Omówienie..................................................................................................... 51 Uaktywnienie Bluetooth w urządzeniu........................................................... 51 Konfiguracja Bluetooth . ...............................................
Uruchamianie aparatu.................................................................................... 80 Funkcje joysticka w trybie aparatu................................................................. 81 Ekran trybu Aparat ........................................................................................ 83 Wykonywanie zdjęć........................................................................................ 91 Ekran trybu Video ...............................................................
Ustawienie trybu procesora..........................................................................119 Ustawienie USB............................................................................................119 Jasność LCD................................................................................................ 120 Bateria .................................................................................................... 120 Pamięć ...............................................................
Specyfikacje P535 Procesor Procesor aplikacji Intel XScale® 520MHz System operacyjny Microsoft® Windows Mobile™ 5.
Zawartość opakowania Sprawdź, czy w opakowaniu z P535 znajdują się następujące elementy: P Urządzenie ASUS P535 P Bateria P Adapter prądu zmiennego P Kabel Mini-USB P Słuchawki P Piórko P Ładowarka samochodowa do telefonów komórkowych* P Zestaw samochodowy (uchwyt PDA z przyssawką do mocowanie na szybie przedniej)* P Torba ochronna P Dysk CD Getting Started P Podręcznik użytkownika P Instrukcja szybkiego uruchomienia P Karta gwarancyjna * elementy opcjonalne UWAGA: Jeśli okaże się, że którekolwiek z wymien
Rozdział Wprowadzenie 1 • Poznanie budowy P535 • Przygotowanie urządzenia • Rozpoczęcie używania • Ekran Dzisiaj 11
Poznanie budowy P535 Układ 2 1 3 4 5 Kontroler głośności 6 Przycisk Reset 7 Dioda LED powiadomienia 8 8 Odbiornik słuchawek dousznych 9 Ekran dotykowy LCD 10 Przycisk połączenia 5 11 Lewy przycisk funkcyjny 12 Przycisk przełącznika tryb/zadanie 13 Przyciski nawigacji 9 6 11 10 12 14 Przycisk akcji 15 Prawy przycisk funkcyjny 16 Przycisk OK lub Zamknij 15 13 17 Przycisk Koniec 17 14 12 Elementy z lewej strony 1 Gniazdo Mini-SD 2 Przycisk zasilania
Poznanie budowy P535 Komponenty: 18 Lampa błyskowa aparatu 19 Obiektyw aparatu 20 18 23 21 19 24 20 Złącze anteny GPS 21 Głośnik 22 Wnęka na baterię 23 Przycisk dyktafonu 24 Przycisk Hold (Zatrzymanie) 25 Gniazdo słuchawek dousznych 22 26 Złącze Mini-USB 27 Mikrofon Elementy z prawej strony Elementy w części tylnej 25 26 Elementy w części dolnej 27 13
Opis komponentów urządzenia Nr. 14 Element Opis 1 Gniazdo Mini-SD Umożliwia wkładanie karty Mini-SD do przechowywania danych. 2 Przycisk zasilania Pojedyncze naciśnięcie ustawia tryb zawieszenia lub wybudza urządzenie z trybu uśpienia. Naciśnij i przytrzymaj w celu WŁĄCZENIA lub WYŁĄCZENIA zasilania. 3 Piórko Piórko służy do pisania, rysowania lub wybierania elementów na ekranie dotykowym. 4 Przycisk Aparat/Migawka Naciśnięcie uruchamia aparat.
Opis komponentów urządzenia Nr. Element Opis 14 Przycisk akcji Naciśnięcie umożliwia wykonanie zadania wybranego elementu. 15 Prawy przycisk funkcyjny Wykonuje zadanie oznaczone nad przyciskiem. 16 Przycisk OK lub Zamknij Naciśnięcie potwierdza komendę lub powoduje zamknięcie/zakończenie otwartej aplikacji. 17 Przycisk Koniec Naciśnięcie tego przycisku powoduje zakończenie połączenia. 18 Lampa błyskowa aparatu Umożliwia wykonanie zdjęć obrazów w ciemnym otoczeniu.
Przygotowanie urządzenia Instalacja karty SIM i baterii Przed wykonaniem połączenia telefonicznego z wykorzystaniem P535, wymagana jest instalacja karty SIM (Subscriber Identity Module [Moduł identyfikacji abonenta]). Karta SIM zawiera numer telefoniczny abonenta, szczegółowe informacje dotyczące abonenta, książkę telefoniczną oraz dodatkową pamięć telefonu. P535 jest dostarczany z ładowalną baterią litowo-jonową. Nowe baterie są częściowo rozładowane i przed ich użyciem należy je całkowicie naładować.
2. Wyjmij baterię. 3. Włóż kartę SIM stroną ze złotymi stykami skierowaną do dołu, naciętym rogiem w kierunku górnego, lewego narożnika gniazda, zgodnie z ilustracją. 4. Włóż baterię do wnęki tak, aby miedziane styki baterii były wyrównane z miedzianym przewodnikiem urządzenia. 5. Załóż pokrywę baterii.
Ładowanie baterii Zestaw baterii po dostarczeniu jest częściowy naładowany. Przed pierwszym użyciem, baterię należy ładować do czterech (4) godzin. Ładowanie baterii: 1. Podłącz wtyczkę adaptera prądu zmiennego do złącza mini-USB w dolnej części urządzenia. 2. Podłącz wtyczkę zasilania prądu zmiennego do uziemionego gniazda ściennego lub do listwy zasilania. UWAGA: • Dioda LED powiadamiania zmienia kolor na czerwony, a na pasku zadań pojawia się ikona baterii, wskazując ładowanie baterii.
Rozpoczęcie używania Zasilanie urządzenia Przed pierwszym użyciem należy sprawdzić, czy urządzenie P535 jest całkowicie naładowane. Włączenie zasilania: 1. Naciśnij i przytrzymaj przycisk zasilania. Przycisk zasilania 2. Wykonaj instrukcje ekranowe w celu wyrównania ekranu i ustawienia strefy czasowej. Używanie piórka Piórko jest urządzeniem podobnym do pióra, które znajduje się z tyłu górnego, prawego narożnika P535. • Piórko można stosować do pisania, wybierania lub przeciągania elementów na ekranie.
Kalibracja P535 Kalibracja urządzenia daje pewność, że element stuknięty na ekranie zostanie uaktywniony. Obejmuje ona stukanie w środkową część celów pojawiających się w różnych miejscach ekranu. Kalibracja ekranu: 1. Stuknij > Ustawienia > zakładkę System, a następnie stuknij ikonę Ekran. 2. W zakładce Ogólne, stuknij Wyrównaj ekran i wykonaj instrukcje na kolejnych ekranach kalibracji. Ekran kalibracji można także wywołać poprzez jednoczesne naciśnięcie przycisków Tryb oraz Usuń.
Ekran Dzisiaj Na ekranie Dzisiaj wyświetlane są użyteczne informacje. Ekran Dzisiajmożna tak skonfigurować, aby wyświetlane były na nim wszystkie wymagane, ważne informacje. • W celu dostępu do ekranu Dzisiaj, stuknij Start > Dzisiaj. • W celu personalizacji ekranu Dzisiaj, stuknij Start > Ustawienia > zakładka Osobiste > Dzisiaj.
Wskaźniki stanu Sprawdź tabelę poniżej w celu uzyskania informacji o ikonach wskaźników stanu na ekranie Dzisiaj. Ikona Opis Dostępne połączenie GPRS (General Packet Radio Services [Technologia transmisji danych metodą pakietową]). Łączenie przez GPRS Połączono przez GPRS. Łączenie przez ActiveSync. Nieaktywne połączenie ActiveSync. Trwa synchronizacja ActiveSync. Błąd synchronizacji. Połączenie przekazane. Połączenie aktywne. Połączenie zatrzymane. Połączenie nieudane. 22 Nowa wiadomość.
Wskaźniki stanu Ikona Opis Nowa poczta głosowa. Brak usługi telefonu komórkowego. Brak sygnału. Wyszukiwanie usługi telefonu komórkowego. Oznaczenie siły sygnału. WYŁĄCZENIE dźwięku. WŁĄCZENIE dźwięku. Słabe naładowanie baterii. Bardzo niski stan naładowania baterii. Zagrożenie utratą danych. Bateria częściowo naładowana. Ładowanie baterii. Bateria całkowicie naładowana.
Wskaźniki stanu Ikona Opis Wyszukiwanie połączenia Wi-Fi. Aktywne Wi-Fi. Roaming. Ikona ta jest wyświetlana wyłącznie wtedy, gdy włączona jest funkcja roamingu międzynarodowego. Włączenie trybu wibratora lub trybu wyłączenia dźwięku. Podłączone słuchawki Bluetooth. Podłączone słuchawki Bluetooth z aktywnym dźwiękiem. Pojawia się po ustawieniu alarmu. Brak zainstalowanej karty SIM. Wskaźnik notatki. Stuknij, aby wyświetlić notatkę. Powiadomienie o usłudze Pocket MSN.
Orientacja ekranu Można ustawić trzy różne orientacje ekranu: 1. Pionowa 2. Pozioma (do prawej) 3. Pozioma (do lewej) Ustawienie na tryb Pionowa (Portrait) umożliwia uzyskanie lepszej widoczności lub lepszego działania niektórych aplikacji urządzenia. Ustawienie na tryb Pozioma (Landscape) jest korzystne podczas oglądania obrazów, video lub oglądania dłuższych plików tekstowych. W celu zmiany orientacji ekranu, stuknij Start > Ustawienia > zakładka System > Ekran, a następnie wybierz wymaganą orientację.
Menu Start Menu Start zawiera różne, powszechnie używane programy i aplikacje. Stuknij Start w celu wyświetlenia elementów menu start: Tryb Pionowy (Portrait) Tryb Poziomy (Landscape) Można także dostosować elementy wyświetlane w menu Start. W tym celu: 1. Stuknij Start > Ustawienia > zakładka Osobiste > Menu. 2. Zaznacz okna opcji elementów, które mają wyświetlać się w menu Start. Można wybrać do siedmiu (7) elementów.
Rozdział 2 Wprowadzanie danych • Używanie panelu wprowadzania • Pisanie i rysowanie na ekranie • Nagrywanie głosu • Używanie programu ActiveSync™ • Synchronizacja z serwerem Exchange Server • Wyszukiwanie informacji • Uzyskiwanie pomocy 27
Używanie panelu wprowadzania Po uruchomieniu aplikacji lub wybraniu pola, które wymaga wprowadzenia tekstu, symboli, liczb, na pasku menu pojawia się ikona Input Panel (Panel wprowadzania). Panel wprowadzania umożliwia wybór różnych metod wprowadzania dostępnych w urządzeniu: Block Recognizer, Keyboard, Letter Recognizer i Transcriber. Używanie klawiatury ekranowej Poprzez klawiaturę ekranową, można wprowadzić tam gdzie to możliwe tekst, symbole, liczby lub inne znaki specjalne.
Pisanie i rysowanie na ekranie Możliwe jest pisanie i rysowanie bezpośrednio na ekranie i zapisywanie odręcznych notatek. Jeśli preferowane jest odręczne pismo lub używanie rysunków w notatkach, należy ustawić domyślny tryb wprowadzania na Zapisywanie. Jeśli preferowany jest tekst, należy ustawić domyślny tryb na Wpisywanie. Ustawienie domyślnego trybu wprowadzania dla programu Notatki: 1. Stuknij Start > Programy > Notatki. 2. Na liście programu Notes, stuknij Menu > Opcje. 3.
Nagrywanie głosu W dowolnym czasie, zależnie od tego czy telefon znajduje się w trybie oczekiwania lub w trybie aktywnym, można nagrać dźwięk, głos lub dodać nagranie do notatki podczas korzystania z urządzenia. Rozpoczęcie nagrywania głosu: 1. Naciśnij Przycisk Record (Nagrywaj), aby uruchomić aplikację obsługi dyktafonu. 2. Stuknij ikonę nagrywania, aby rozpocząć nagrywanie. 3. Umieść odbiornik blisko ust lub źródła dźwięku. 4. Po zakończeniu nagrywania stuknij ikonę zatrzymania.
Dodanie nagrania do zapisanej notatki: 1. Stuknij Start > Programy > Notatki. 2. Na liście Notatki, stuknij w celu otworzenia zapisaną notatkę. 3. Jeśli nie jest wyświetlany pasek narzędziowy nagrywania, stuknij Menu > Wyświetl pasek narz. nagrywania. 4. Stuknij ikonę nagrywania w celu rozpoczęcia nagrywania. 5. Umieść odbiornik w pobliżu ust lub źródła dźwięku. 6. Po zakończeniu nagrywania, stuknij ikonę zatrzymania. Ikona nagrywania zostanie wyświetlona na notatce. 7. Stuknij .
Używanie programu ActiveSync™ Program ActiveSync™ umożliwia synchronizację danych urządzenia z danymi komputera. ActiveSync może także wykonywać synchronizację przez sieć bezprzewodową lub komórkową za pośrednictwem dostarczonego oprogramowania Microsoft Exchange Server, jeśli dostawca usługi telefonii komórkowej lub firmy telekomunikacyjnej udostępnia Microsoft Exchange Server poprzez Exchange ActiveSync.
Aby wykonać synchronizację urządzenia z serwerem Exchange Server poprzez firmę lub dostawcę usługi, przed uruchomieniem programu Sync Setup Wizard należy uzyskać od administratora nazwę serwera Exchange Server, nazwę użytkownika, hasło i nazwę domeny. Instalacja i konfiguracja programu ActiveSync w komputerze: 1. Wstaw do napędu dysk Microsoft companion CD dołączony do opakowania z urządzeniem. 2. Wykonaj kolejne instrukcje ekranowe. 3.
Synchronizacja poprzez USB Urządzenie można połączyć z komputerem w celu wykonania synchronizacji dostarczonym z urządzeniem kablem mini-USB. Synchronizacja urządzenia poprzez mini-USB: 1. Po instalacji programu ActiveSync z komputerem, podłącz wtykę mini-USB do złącza mini-USB w dolnej części urządzenia. 2. Podłącz drugi koniec kabla mini-USB z komputerem. Po nawiązaniu połączenia, program ActiveSync automatycznie synchronizuje urządzenie.
Synchronizacja z serwerem Exchange W celu synchronizacji z serwerem Exchange Server: 1. W menu ActiveSync, stuknij Menu > Dodaj źródło serwera. 2. W polu Adres serwera, wprowadź nazwę uruchomionego serwera Exchange Server, a następnie stuknij Dalej. Jeśli będzie to potrzebne, stuknij okno opcji. Serwer wymaga połączenia szyfrowanego (SSL).
3. Wprowadź nazwę, hasło i domenę, a następnie stuknij Dalej. 4. Stuknij okna opcji w celu wyboru danych do synchronizacji z serwerem Exchange Server. W celu zmiany dostępnych ustawień synchronizacji, wybierz element danych i następnie stuknij Ustawienia. Po zakończeniu stuknij Zakończ. 5. Rozpocznij proces synchronizacji.
Ustawienie harmonogramu synchronizacji W celu ustawienia synchronizacji z serwerem Exchange Server: 1. Na ekranie ActiveSync, stuknij, Menu > Harmonogram. 2. Sprawdź tabelę w celu uzyskania szczegółowych informacji dotyczących wejścia. Głośność Zalecane ustawienie Wysoka (High) Wybierz krótszy odstęp na liście Pory szczytu. Niska (Low) Wybierz opcję Po odebraniu elementów lub dłuższy odstęp na liście Pory Poza szczytem.
Wyszukiwanie informacji Poprzez użycie narzędzia do wyszukiwania, można wyszukać pliki i inne elementy zapisane w urządzeniu lub w zewnętrznej karcie MiniSD. Wyszukiwanie można wykonać według nazwy pliku lub według wyrazów w różnych aplikacjach takich jak Kalendarz, Kontakty, Excel Mobile, Word Mobile, Outlook Mobile, Pomoc, Obsługa Wiadomości, Notatki i Zadania. Można także stosować filtrowanie w celu wyszukania plików o rozmiarze większym niż 64 KB. W celu wyszukania pliku lub elementu: 1.
Uzyskiwanie pomocy W bardzo łatwy sposób można uzyskać pomoc dotyczącą używania dowolnego programu urządzenia. W celu uzyskania pomocy dotyczącej programu: • Na ekranie Dzisiaj lub z programu, stuknij Start > Pomoc. Zostanie otworzona strona z łączami do tematów, które wyjaśniają jak używać program. .
Rozdział Funkcje telefonu • Używanie telefonu • Wykonywanie połączenia • Odbieranie połączenia 40 3
Używanie telefonu Podobnie jak w standardowym telefonie komórkowym, P535 można używać do wykonywania i odbierania połączeń. Można także przechowywać historię połączeń wykonywanych i odebranych, wysyłać wiadomości SMS lub MMS, wykonywać notatki w trakcie rozmowy, wykonywać połączenia z modułu Kontakty i kopiować kontakty z karty SIM do urządzenia. Phone pad Moduł Phone pad umożliwia łatwe wybieranie i dostęp do modułów Kontakty, Historia połączeń, Szybkie wybieranie numerów i Ustawienia telefonu.
Regulacja głośności urządzenia Aby wyregulować głośność urządzenia: 1. Stuknij ikonę głośnika. 2. W menu głośności, można: • Wyregulować głośność telefonu lub głośność urządzenia poprzez przesunięcie suwaka do wymaganego poziomu głośności. • Stuknij Włączony, Wibrator lub Wyłączony w celu zmiany ustawień głośności systemu i dzwonka. Można także wyregulować głośność urządzenia poprzez naciśnięcie przycisków kontrolera głośności z lewej strony urządzenia.
Wykonywanie połączenia Połączenie telefoniczne można wykonać z użyciem keypada lub modułu Phone pad. Połączenia można wykonywać także bezpośrednio z modułów Kontakty, Historia połączeń, Szybkie wybieranie numerów. Użycie modułu Phone pad Wykonanie połączenia z użyciem modułu Phone pad: 1. Stuknij Start > Telefon. 2. Na ekranie telefonu, stuknij numer do połączenia, a następnie stuknij . Jeśli wprowadzony został nieprawidłowy numer, stuknij strzałkę do tyłu w celu usunięcia numeru do lewej. 3.
Funkcje modułu Phone pad Nazwa operatora W tym miejscu wyświetlane są wybierane numery Naciśnij w celu usunięcia numeru po lewej Keypad numeryczny Naciśnij w celu ustawienia szybkiego wybierania Naciśnij w celu uruchomienia modułu Historia połączeń Naciśnij w celu wykonania połączenia Naciśnij w celu uruchomienia modułu Lista kontaktów (Contacts list) Naciśnij w celu uruchomienia menu Wyświetla stan bieżącego połączenia Naciśnij w celu wyciszenia Naciśnij w celu uruchomienia modułu 44 Naciśnij w celu
Wykonywanie połączeń z modułu Kontakty W celu wykonania bezpośredniego połączenia z modułu Kontakty: 1. Stuknij Start > Telefon. 2. Z modułu Phone pad, stuknij Kontakty lub naciśnij lewy przycisk funkcyjny. Moduł Kontakty można także uruchomić z ekranu Dzisiaj, poprzez stuknięcie Kontakty na pasku menu lub naciśnięcie prawego przycisku funkcyjnego. 3.
Używanie modułu Szybkie wybieranie numerów Moduł Szybkie wybieranie numerów umożliwia wykonywanie połączenia z często wybieranymi numerami poprzez pojedyncze stuknięcie. Na przykład, jeśli w module Szybkie wybieranie numerów do kontaktu przydzielony został numer 2, wystarczy stuknąć i przytrzymać w module Phone pad w celu wybrania skojarzonego z nim numeru telefonicznego kontaktu. Utworzenie pozycji modułu Szybkie wybieranie numerów: 1. Upewnij się, że tworzona pozycja znajduje się już w module Kontakty.
Odbieranie połączenia Podczas odbierania połączenia, wyświetlany jest komunikat, udostępniając opcję odpowiedzi lub zignorowania nadchodzącego połączenia. Aby odpowiedzieć lub odrzucić nadchodzące połączenie: • Aby odpowiedzieć na połączenie, stuknij Odbierz lub naciśnij Przycisk połączenia. • Aby odrzucić nadchodzące połączenie, stuknij Ignoruj lub naciśnij Przycisk zakończenia.
Rozdział 4 Funkcje bezprzewodowe • Używanie programu Wireless Manager • Używanie Bluetooth® • Używanie sieci WLAN (IEEE 802.
Używanie programu Wireless Manager Program Wireless Manager umożliwia wyłączenie zasilania połączeń bezprzewodowych z jednego miejsca. Jest to szybki sposób uruchomienia oszczędzania energii baterii lub przygotowania urządzenia do lotu samolotem. Aby rozpocząć używanie programu Wireless Manager: 1. Stuknij zakładkę Start > Ustawienia > Połączenia. 2. Stuknij Menedżer bezprzewodowy. 3.
Używanie Bluetooth® Omówienie Bluetooth® to technologia bezprzewodowej komunikacji krótkiego zasięgu, która umożliwia wymianę danych pomiędzy urządzeniami z obsługą Bluetooth w zakresie odległości około 10 metrów (30 stóp), bez konieczności nawiązywania połączenia fizycznego. Włączenie Bluetooth w urządzeniu umożliwia: • Połączenie i komunikację (np. przesyłanie plików, zadań, kontaktów) z innymi urządzeniami obsługującymi Bluetooth. • Korzystanie z usług Bluetooth.
Konfiguracja Bluetooth Konfiguracja Bluetooth w urządzeniu: 1. Start > Ustawienia > Połączenia a następnie stuknij ikonę Bluetooth. 2. Na ekranie Bluetooth, można uzyskać dostęp do następujących zakładek: • Ogólne - umożliwia ustawienie profilu użytkownika, włączenia lub wyłączenia Bluetooth, wyświetlania stanu Bluetooth i udostępnia łącze do programu Menedżer Bluetooth.
Używanie słuchawek Bluetooth Ustawienia słuchawek Mono 1. Upewnij się, że w urządzeniu włączona jest funkcja Bluetooth. 2. Stuknij na ekranie Dzisiaj, a następnie w menu skrótów stuknij Menedżer Bluetooth. 3. W oknie programu Menedżer Bluetooth, stuknij Nowe. 4. W oknie kreatora Bluetooth Connection Wizard, stuknij ustawienia Konf.urz. głoś./zes. sułchaw., a następnie stuknij Dalej.
5. Upewnij się, że słuchawki znajdują się w trybie parowania i są gotowe do odebrania nadchodzącego połączenia, a następnie stuknij Dalej. 6. Stuknij nazwę urządzenia z włączoną funkcję Bluetooth, a następnie stuknij Dalej. 7. W polu Hasło (Passkey), wprowadź alfanumeryczne hasło dla słuchawek i stuknij . Hasło znajduje się w dokumentacji dostarczonej ze słuchawkami. 8. Stuknij Zakończ. Można już rozpocząć używanie słuchawek.
Ustawienia słuchawek stereo P535 obsługuje A2DP (Advanced Audio Distribution Profile [Zaawansowany profil dystrybucji audio]), wykorzystywany przez słuchawki stereo Bluetooth. Sprawdź, czy słuchawki stereo obsługują A2DP. 1. Stuknij na ekranie Dzisiaj, a następnie w menu skrótów stuknij Menedżer Bluetooth. 2. Na ekranie Menedżer Bluetooth, stuknij Nowe, a następnie wybierz Konfiguracja High Quality Audio. 3.
5. Stuknij Zakończ w celu zainicjowania połączenia. UWAGI: • W celu odpowiedzi na połączenie telefoniczne z użyciem słuchawek stereo, upewnij się, że w tym samym czasie ustawione jest połączenie mono i stereo. • Aby stosować komendy głosowe podczas używania słuchawek, naciśnij przycisk odpowiedzi na słuchawkach, a następnie wykonaj podane instrukcje. (*Przycisk odpowiedzi może nie być obsługiwany w innych modelach słuchawek.) Używanie GPS Bluetooth W celu konfiguracji GPS Bluetooth: 1.
6. Stuknij nazwę urządzenia GPS Bluetooth, a następnie stuknij Dalej. 7. Wybierz Podrzędne SPP (SPP Slave) na liście Wybór usługi, a następnie stuknij Dalej. 8. Stuknij Zakończ. 9. Stuknij i przytrzymaj ikonę skrótów w celu wyświetlenia menu skrótów, a następnie stuknij Połącz. 10. W polu Hasło (Passkey), wprowadź alfanumeryczne hasło dla urządzenia GPS, a następnie stuknij OK. Można to znaleźć w dokumentacji dostarczanej z urządzeniem GPS.
Używanie sieci WLAN (IEEE 802.11b/g) Wprowadzenie WLAN (IEEE 802.11b/g), odnosi się do pewnych typów sieci WLAN (wireless local area network [bezprzewodowa sieć lokalna]), która wykorzystuje specyfikacje rodziny 802.11. Rodzina ta utworzona została przez Wi-Fi Alliance, międzynarodową organizację nonprofit w celu zapewnienia współdziałania produktów dla bezprzewodowych sieci lokalnych.
Konfiguracja sieci WLAN Konfiguracja WLAN w urządzeniu: 1. Start > Ustawienia > Połączenia, następnie stuknij ikonę Menedżer Wi-Fi. 2. Na ekranie Menedżer Wi-Fi, można uzyskać dostęp do następujących zakładek: • Stan Wi-Fi • Ustawienia • Informacje o IP • Funkcja Site Survey UWAGA: Stuknij ? w celu uzyskania pomocy na temat Wi-Fi. Stan Wi-Fi Ustawienia Wyświetla stan Wi-Fi, ESSID, BSSID, tryb BSS, kanał, szybkość przesyłania danych, adres IP i siłę sygnału.
Informacja o IP Funkcja Site Survey Survey Wyświetla informacje o sieci i umożliwia odnowienie lub ping połączenia sieciowego. Pokazuje dostępne sieci bezprzewodowe w danym obszarze.
Ustawienie połączenia GPRS P535 umożliwia połączenie poprzez GPRS (General Packet Radio Service [Usługa transmisji danych metodą pakietową]). GPRS to standard komunikacji bezprzewodowej, działający z szybkością do 115 kbps, w porównaniu do szybkości 9,6 kbps systemu GSM (Global System for Mobile Communications [Ogólnoświatowy system komunikacji przenośnej]).
4. Na ekranie Połączenia, stuknij Dodaj nowe połączenie modemowe. 5. Wprowadź unikalną nazwę dla połączenia, a następnie wybierz na liście modemów łącze komórkowe (GPRS).
6. Wprowadź nazwa punktu dostępu. 7. Wprowadź nazwa użytkownika, hasło, domena, a następnie stuknij Zakończ. Skontaktuj się z administratorem sieci w celu uzyskania pomocy. UWAGA: W tym samym czasie nie można używać połączeń GPRS i USB.
Podłączanie GPRS W celu podłączenia GPRS: 1. Stuknij Start > Ustawienia > Połączenia, a następnie stuknij ikonę Połączenia. 2. Na ekranie Połączenia, stuknij Zarządzaj istniejącymi połączeniami. 3. Stuknij i przytrzymaj istniejące połączenie, a następnie w menu podręcznym stuknij Połącz. Stuknij Usuń, aby usunąć ustawienie wybranego połączenia. 4. Po nawiązaniu połączenia, stuknij p w celu zakończenia. UWAGA: Gdy sieć WLAN jest używana równocześnie z GPRS, priorytet sygnału ma ostatnio podłączona opcja.
Jeśli połączenie GPRS jest ustawione domyślnie GPRS, zostanie ono automatycznie nawiązane po uruchomieniu aplikacji, która łączy się z siecią Internet. 1. Uruchom aplikację, która łączy się z Internetem (np. Internet Explorer). Urządzenie automatycznie wykona domyślne połączenie GPRS. Zostanie wyświetlone okno pomocnicze, wyświetlające stan połączenia. Wywołanie okna pomocniczego 2. Po nawiązaniu, można rozpocząć przeglądanie Internetu.
Używanie programu GPRS Tool Program GPRS Tool umożliwia wygodny wybór i łączenie z dostawcą usługi GPRS. W celu połączenia poprzez GPRS Tool: 1. Stuknij Start > Ustawienia > zakładka Połączenia, a następnie stuknij ikonę Ustawienia sieci. Można także stuknąć na pasku stanu, a następnie stuknąć Ustawienia z menu podręcznego. 2. Na ekranie Ustawienie sieci, wybierz z listy dostawcę GPRS. UWAGA: • Operatorzy mogą być zróżnicowani w zależności od regionu.
Rozdział My Secrets 5 • Używanie funkcji My Secrets 67
Używanie funkcji My Secrets My Secrets to ukryte archiwum, w którym przechowywane są sklasyfikowane jako poufne dokumenty, zdjęcia i video. Elementy umieszczone w folderze My Secrets są w celu zabezpieczenia zaszyfrowane. Do odblokowania foldera lub zmiany ustawień, wymagane jest hasło zdefiniowane przez użytkownika. Włączenie funkcji My Secrets W celu włączenia funkcji My Secrets w trybie Tryb ekspresowy (zalecany): 1. Stuknij Start > Programy, a następnie stuknij ikonę My Secrets. 2.
3. Wprowadź 4-cyfrowe hasło. 4. Po wyświetleniu polecenia, wprowadź ponownie to samo hasło w celu potwierdzenia. 5. Stuknij Zakończ. Po zakończeniu, folder My Documents\My Secrets będzie folderem zaszyfrowanym. Można już rozpocząć używanie tego foldera. WAŻNE: • Po zablokowaniu, folder My Secrets zostanie ukryty. W celu odblokowania foldera i dostępu do plików należy użyć hasła. • W celu zablokowania, odblokowania i konfiguracji funkcji My Secrets, można stuknąć ikonę My Secrets na ekranie Dzisiaj.
Odblokowanie My Secrets W celu odblokowania My Secrets: 1. Stuknij ikonę My Secrets ekranie Dzisiaj. na 2. W menu skrótów, stuknij Odblokuj. 3. Wprowadź prawidłowe hasło. Można już korzystać z foldera My Secrets.
Blokowanie My Secrets W celu zablokowania My Secrets: 1. Stuknij ikonę My Secrets Dzisiaj. na ekranie 2. W menu skrótów, stuknij Zablokuj. Ikona My Secrets zostanie zmieniona na , informując o blokadzie foldera My Secrets.
Ustawienia My Secrets W celu modyfikacji ustawień My Secrets (Moje poufne informacje): 1. Stuknij ikonę My Secrets ekranie Dzisiaj. na 2. W menu skrótów, stuknij Ustawienia aplikacji My Secrets. 3. Wprowadź prawidłowe hasło.
Ustawienie zabezpieczenia Ustawienie zabezpieczenia, umożliwia włączenie lub wyłączenie automatycznego blokowania, po przejściu urządzenia do trybu uśpienia, doraźne zablokowanie urządzenia, lub zatrzymanie zabezpieczenia. Hasło Zakładka Hasło, umożliwia zmianę hasła i typu hasła.
Podpowiedź do hasła Podpowiedź należy ustawić na wypadek zapomnienia hasła. • Stuknij okienko opcji w celu włączenia lub wyłączenia stosowania podpowiedzi w celu odblokowania urządzenia. • Wybierz jedno z predefiniowanych pytań, a następnie wprowadź odpowiedź. 4. Po zakończeniu stuknij 74 .
Wyłączanie funkcji My Secrets W celu wyłączenia funkcji My Secrets: 1. Na ekranie Dzisiaj, stuknij Start > Programs > My Secrets lub Stuknij ikonę My Secrets na ekranie Dzisiaj w menu skrótów, stuknij Ustawienia aplikacji My Secrets. 2. Wybierz zakładkę Ustawienie zabezpieczenia, a następnie stukni Zatrzymaj zabezpieczenie.
3. Po wyświetleniu pytania, stuknij Tak w celu potwierdzenia. 4. Stuknij Dalej, aby zatrzymać wszystkie uruchomione programy.
5. Stuknij Dalej w celu rozpoczęcia deszyfrowania plików w folderze My Secrets. 6. Po zakończeniu, stuknij Wykonane.
Rozdział 6 Funkcje multimedialne • Używanie aparatu fotograficznego • Oglądanie obrazów i video 79
Używanie aparatu fotograficznego Wbudowany dwu-megapikselowy aparat fotograficzny, umożliwia wykonywanie zdjęć i nagrywanie klipów audio/video. Uruchamianie aparatu Rozpoczęcie używania aparatu: • Stuknij Start > Programy > Obrazy i wideo > Ikona Aparat lub • Naciśnij przycisk Aparat z lewej strony urządzenia.
Funkcje joysticka w trybie aparatu Poniżej znajduje się opis funkcji 5-kierunkowego joysticka w trybie Aparat: W górę Przycisk ENTER/AKCJA Do tyłu Do przodu W dół W górę Naciśnięcie w trybie podglądu aparatu, przełącza do trybu video. Naciśnięcie w menu opcji aparatu lub video, umożliwia wybór elementów menu. W dół Naciśnięcie w trybie podglądu video, przełącza do trybu aparatu. Naciśnięcie w menu opcji aparatu lub video, umożliwia wybór elementów menu.
Dostępne tryby wykonywania zdjęć Dostępne są dwa tryby aparatu: • Tryb Aparat - Tryb Aparat umożliwia wykonywanie zdjęć i zapisywanie ich w na karcie MiniSD urządzenia. Można także skonfigurować aparat w celu dopasowania do warunków otoczenia, ustawienia rozmiaru zdjęć, wyboru powiększenia, regulacji jakości obrazu, zastosowania efektów i modyfikacji innych zaawansowanych ustawień. • Tryb Video - Tryb Video umożliwia nagrywanie klipów audio/video.
Ekran trybu Aparat Poniżej znajduje się opis ikon ekranowych w trybie Aparat: Stuknij w celu uruchomienia Obrazy i video (Picture and Video) Liczba możliwych do wykonania zdjęć Ikona trybu przechwytywania Ikona jakości zdjęć Stan lampy błyskowej Stan trybu makro Ikona domyślnej pamięci Ikona trybu sceny Ikona timera Stan trybu zdjęć seryjnych Ikona efektów Rozdzielczość obrazu Stuknij w celu uzyskania zbliżenia aparatu Stuknij w celu powiększenia Ikony trybu przechwytywania: Tryb Aparat Tryb Video Stuk
Ikony trybu Aparat • Ikona trybu przechwytywania [ • Ikona jakości obrazów [ / / / ]- wskazuje używaną jakość obrazów. • Ikona stanu lampy błyskowej [ • Ikona trybu makro [ / / ] - wskazuje stan lampy błyskowej aparatu. ] - ikona ta pojawia się, gdy aparat jest w trybie makro. • Ikona domyślnej pamięci [ / wykonanych zdjęć i klipów video. • Ikona trybu sceny [ ] - wskazuje bieżący tryb przechwytywania. / / ] -wskazuje domyślną pamięć do przechowywania ] - wskazuje używany tryb sceny.
Menu opcji aparatu Menu opcji aparatu, umożliwia zmianę różnych ustawień aparatu i obrazu. W celu uruchomienia menu opcji: 1. Stuknij Menu na ekranie aparatu. 2. Stuknij ikonę w menu skrótów, w celu wyświetlenia reprezentowanej przez nią zawartości.
Tryb Zmiana Opcja Change Trybu Zmiana, umożliwia ustawienie trybu przechwytywania na Aparat lub Video. Scena Opcja Scena, umożliwia wybór wstępnych ustawień, odpowiednich do wykonywania zdjęć nocnych lub zdjęć sportowych. Wybierz Automatyczne w celu uzyskania najlepszych ustawień dla każdej sceny. Rozmiar obrazu Umożliwia ustawienie rozmiaru ramki obrazu.
Jakość obrazu Opcja ta udostępnia trzy wstępne ustawienia jakości obrazów: Normalna, Dokładne i Super dokładne. Domyślnie, ustawiona jest jakość obrazu Super dokładne. Tryb lampa błyskowa Opcja ta umożliwia zmianę trybu lampy błyskowej w celu dopasowania do różnych warunków oświetlenia. Tryb Makro Włącza lub wyłącza funkcję wykonywania zdjęć makro.
Zoom Umożliwia zmianę maksymalnego, dozwolonego powiększenia. Samowyzwalacz Ustawia opóźnienie migawki na 5 lub 10 sekund, po naciśnięciu przycisku aparat/ migawka. Seria Umożliwia wykonanie 4 lub 9 kolejnych zdjęć, po pojedynczym naciśnięciu przycisku aparat/migawka.
Ramka Umożliwia ustawienie ramki. Efekt Opcja efekt, umożliwia zastosowanie efektów do obiektu. Można wybierać spośród następujących opcji konfiguracji: Czarno-białe, Negatyw oraz Sepia. Ustaw Normalne, aby nie używać żadnych efektów. Zapisz do Umożliwia wybór domyślnej pamięci do zapisywania przechwyconych obrazów. UWAGA: Przed ustawieniem domyślnej pamięci na Karta zapisu danych należy przygotować kartę MiniSD Card.
Zaawansowane (Advanced) Opcja ta umożliwia ustawienie następujących elementów: - Format prefiksu nazwy pliku - Prefiks nazwy pliku - Numer pliku - Pieczątka daty i czasu - Dźwięk migawki - Odstęp serii 90
Wykonywanie zdjęć Po uruchomieniu aparatu, urządzenie domyślnie jest ustawione na tryb Aparat. Aby zmienić to ustawienie, stuknij Menu > Tryb Zmiana > Tryb Aparat, a następnie stuknij Wykonane. Można także ustawić tryb aparatu poprzez stuknięcie ikony trybu aparatu na ekranie. Wykonywanie zdjęć: 1. Wyceluj urządzenie w obiekt, a następnie naciśnij do połowy przycisk aparat/migawka w celu ustawienia automatycznej ostrości na obiekcie.
Ekran trybu Video Poniżej znajduje się opis ikon ekranowych w trybie Video: Ikona trybu przechwytywania Pozostały czas nagrywania video Ikona domyślnej pamięci Stuknij w celu uruchomienia Obrazy i video Wskaźnik nagrywania Zielony: Gotowość.
Ikony trybu Video • Ikona trybu przechwytywania [ / • Ikona stanu lampy błyskowej [ błyska. ] - ikona ta pojawia się gdy dostępna jest lampa • Ikona trybu makro [ ] - ikona ta pojawia się, gdy video znajduje się w trybie makro. • Ikona domyślnej pamięci [ video. • Ikona efektów [ / • Rozdzielczość obrazu [ • Ikona zakończenia [ ] - wskazuje bieżący tryb przechwytywania. / / / / ] - wskazuje domyślną pamięć do zapisu klipów ] - wskazuje stosowane efekty. / ] - pokazuje stosowaną rozdzielczość.
Menu opcji video Menu opcji video umożliwia zmianę różnych ustawień video i ustawień odtwarzania. W celu uruchomienia menu opcji video: 1. Stuknij Menu na ekranie video. 2. Stuknij w menu skrótów ikonę, w celu wyświetlenia jej zawartości.
Trybu Zmiana Opcja Trybu Zmiana, umożliwia ustawienie urządzenia na tryb Aparat lub Video. Zoom Umożliwia zmianę maksymalnego, dozwolonego powiększenia. Rozmiar video Umożliwia ustawienie rozmiaru klatek video.
Tryb lampa błyskowa Opcja ta umożliwia zmianę trybu lampy błyskowej w celu dopasowania do różnych warunków oświetlenia. Tryb Makro Włącza lub wyłącza funkcję wykonywania zdjęć makro. Zapisz do Umożliwia wybór domyślnego miejsca zapisywania przechwyconych obrazów. UWAGA: Przed ustawieniem domyślnej pamięci na Karta zapisu danych należy przygotować kartę MiniSD Card.
Efekt Opcja efekt, umożliwia zastosowanie efektów do obiektu. Można wybierać spośród następujących opcji konfiguracji: Czarno-białe, Negatyw oraz Sepia. Ustaw Normalne, aby nie używać żadnych efektów.
Nagrywanie video Ustaw urządzenie na tryb przechwytywania video w celu nagrania video. W celu ustawienia trybu video: • Stuknij Menu > Trybu Zmiana > Tryb Video, a następnie stuknij Wykonane. • Można także ustawić tryb video poprzez stuknięcie ikony trybu video na ekranie, zgodnie z ilustracją. Ikona trybu Video W celu nagrania video: 1. Wyceluj urządzenie w obiekt, a następnie naciśnij do połowy przycisk aparat/ migawka w celu ustawienia automatycznej ostrości na obiekcie.
2. Naciśnij do końca przycisk aparatu/ migawki lub naciśnij przycisk nawigacji, aby rozpocząć nagrywanie. Podczas nagrywania video, wskaźnik nagrywania zmienia kolor z zielonego na czerwony. 3. Naciśnij ponownie do końca przycisk aparatu/migawki lub naciśnij przycisk nawigacji, aby zatrzymać nagrywanie. Wskaźnik nagrywania 4. Powtórz czynności 1 do 4 w celu nagrania innego materiału video. UWAGA: • Klip video jest automatycznie zapisywany w domyślnym miejscu zapisywania.
Oglądanie obrazy i video Użyj aplikacji Obrazy i video do oglądania zapisanych obrazów i odtwarzania klipów video. Oglądanie obrazów i video W celu oglądania obrazów i video: 1. Stuknij Start > Programy > Obrazy i wideo. 2. Stuknij obraz lub klip video do oglądania. . • W celu oglądania obrazów lub uruchamiania klipów video zapisanych na karcie MiniSD, stuknij listę foldera (z etykietą Moje obrazy) i stuknij Karta MiniSD.
Rozdział Inne funkcje 7 • WorldCard Mobile • Remote Presenter • Ustawienia sygnału dzwonka • Ustawienia wybudzania • Przełącznik trybu • Informacje o systemie • Przywracanie fabrycznych ustawień domyślnych 101
WorldCard Mobile WorldCard Mobile to narzędzie do rozpoznawania pisma, które skanuje i analizuje szczegółowe informacje dotyczące wyglądu znaków na wykonanym zdjęciu wizytówki. Uzyskane dane są następnie identyfikowane i kategoryzowane, a następnie poddawane konwersji do edytowalnego tekstu na liście Kontakt (Contact). Używanie programu WorldCard Mobile W celu przetwarzania wizytówki w programie WorldCard Mobile: 1. Stuknij Start > Programy > WorldCard Mobile. 2.
WAŻNE: • Przed wykonaniem zdjęcia wizytówki należy sprawdzić czystość obiektywu aparatu i zapewnić odpowiednie oświetlenie. • Do wykonania zdjęcia wizytówki należy zastosować rozdzielczość “1600x1200”. 3. Wykonaj wyraźne zdjęcie wizytówki. 4. Jeśli obraz nie jest wystarczająco wyraźny do dalszego przetwarzania, stuknij Worldcard Mobile, aby powrócić do menu WorldCard; lub, stuknij Spróbuj ponownie (Try again). 5. W razie potrzeby, wybierz Language (Język) lub Region (Region) dla wizytówki.
7. Stuknij Export (Eksportuj), aby zapisać informacje w opcji Contacts (Kontakty). Sprawdź poniżej inne opcje i funkcje na ekranie. Stuknij, aby zmienić opcję Category (Kategoria) Stuknij, aby zaznaczyć okno opcji w celu wyłączenia lub włączenia pola danych Stuknij odpowiednią strzałkę, aby zmienić pole danych Stuknij, aby dodać pole danych Stuknij, aby zapisać informację w opcji Contacts (Kontakty) Stuknij w celu przeglądu obrazu 8. Stuknij ,aby zakończyć działanie programu WorldCard Mobile.
Zdalnego prezentera Program Remote Presenter urządzenia P535, umożliwia zdalne sterowanie prezentacjami programu PowerPoint™ uruchomionymi na komputerze desktop lub notebook. Działanie poprzez połączenie Bluetooth, zapewnia wygodę i swobodę poruszania podczas prezentacji. Możliwe jest także przeglądanie notatek dotyczących slajdów bez zakłócania widoku slajdów uczestnikom pokazu slajdów.
Poniżej znajduje się opis menu programu Remote Presenter na ekranie komputera. Ścieżka do pliku .ppt programu PowerPoint Port COM Bluetooth 3. Z listy znalezionych urządzeń Bluetooth, wybierz nazwę komputera zawierającego prezentację PowerPoint, a następnie kliknij Dalej. 106 Stuknij w celu rozpoczęcia lub zatrzymania Stuknij, aby zmienić ścieżkę Stuknij w celu zakończenia 4. Po wyświetleniu polecenia, wprowadź do komputera i do P535 hasło uwierzytelnienia.
5. W menu programu Remote Controller w komputerze, kliknij , aby ustanowić połączenie. Stuknij , aby zakończyć wyświetlanie przypomnienia. 6. Po ustanowieniu połączenia, stuknij Połącz.
7. Urządzenie wyświetli informację o udanym lub nieudanym nawiązaniu połączenia. Jeśli połączenie nie powiodło się należy powtórzyć czynności, od czynności 1. 8. Stuknij nazwę pliku programu PowerPoint (.ppt) do wyświetlenia, a następnie stuknij Wybierz.
Po wybraniu, następuje automatyczne uruchomienie w komputerze programu Microsoft® PowerPoint z otwartym wybranym plikiem.
9. Można teraz zdalnie sterować prezentacją PowerPoint zapisaną w komputerze poprzez urządzenie. Poniżej znajduje się opis menu sterowania w urządzeniu.
Ustawienia sygnału dzwonka P535 umożliwia dodawanie i konfigurację ulubionej muzyki jako sygnału dzwonka. Można łatwo skonfigurować ulubioną piosenkę jako sygnał dzwonka w następujących, zgodnych formatach audio: aac/acc+, amr, .mp3, .wav, .wma, and .mid. Dodawanie sygnału dzwonka do wybranych sygnałów W celu dodanie sygnału dzwonka do kategorii wyboru w ustawieniach telefonu: 1. Stuknij Start > Ustawienia> Osobiste> > Ikona sygnały dzwonka. 2. Wybierz określone rozszerzenie pliku z listy w oknie. 3.
Ustawienie sygnału dzwonka W celu zmiany sygnału dzwonka: 1. Stuknij Start > Ustawienia > Osobiste > Ikona Telefon. 2. Wybierz sygnał dzwonka z pola Dźwięk dzwonka: lista rozwijana. Na liście znajdują się piosenki lub dźwięki dodane jako sygnały dzwonka, a także domyślne sygnały dzwonka, dostarczone z urządzeniem. Stuknij w celu sprawdzenia brzmienia sygnału dzwonka i stuknij w celu zatrzymania. 3. Po zakończeniu stuknij 112 .
Ustawienia wybudzania W celu wyprowadzenia urządzenia z trybu uśpienia, można ustawić wybudzanie. W celu ustawienia akcji wybudzania: 1. Stuknij Start > Ustawienia > Osobiste > ikona Ustawienia wybudzania. 2. Wybierz spośród dostępnych akcji wybudzania. Stuknij Zaznacz wszystko w celu wybrania wszystkich akcji lub stuknij Odznacz wybieraj w celu usunięcia zaznaczenia wszystkich dostępnych akcji. 3. Po zakończeniu stuknij .
Przełącznik trybu Przełącznik trybu umożliwia łatwe przełączanie pomiędzy aplikacjami i zadaniami. W celu użycia przełącznika trybu, naciśnij przycisk przełącznika trybu na keypadzie urządzenia. Naciśnij ponownie w celu przełączenia pomiędzy aplikacjami. Do włączenia lub wyłączenia lampy, można także zastosować przycisk przełącznika trybu. Aby wykorzystać tę funkcję, naciśnij i przytrzymaj przycisk przełącznika trybu.
Informacje o systemie Moduł Informacje o systemie zawiera ważne informacje dotyczące ustawień i wersji bieżącego urządzenia. W celu uruchomienia modułu Informacje o systemie: 1. Stuknij Start > Ustawienia > System > ikona Informacje o systemie. 2. Stuknij zakładkę Informacje o urządzeniu w celu uzyskania informacji o urządzeniu. 3. Stuknij zakładkę Wersja w celu wyświetlenia informacji o wersji ROM, Programu rozruchowego, Radia, MP oraz baterii.
Przywracanie fabrycznych ustawień Ta opcja umożliwia przywrócenie domyślnych ustawień fabrycznych. W celu przywrócenia domyślnych ustawień: 1. Stuknij Start > Programy > Ustawienia domyślne. 2. Wprowadź ‘1234’ w polu Hasło w celu potwierdzenia przywracania domyślnych ustawień. 3. Stuknij Ok. Ustawienia fabryczne można także odtworzyć poprzez jednoczesne naciśnięcie przycisku nawigacji UP (W GÓRĘ) i przycisku reset OSTRZEŻENIE: Opcja ta spowoduje usunięcie wszystkich plików zapisanych w tym urządzeniu.
Rozdział 8 Stan komponentów urządzenia • Ikona stanu ASUS 117
Ikona stanu ASUS Ikona stanu ASUS umożliwia łatwe sprawdzenie i wyświetlenie bieżącego stanu następujących komponentów urządzenia: Procesor, USB, jasność LCD, stan naładowania baterii, pamięć, karta MiniSD i pamięć masowa. W celu sprawdzenia stanu tych komponentów, stuknij ikonę Stan ASUS na ekranie Dzisiaj. Procesor: Umożliwia ustawienie trybu procesora. Ustawienie Tryb automatyczny, powoduje automatyczną zmianę szybkości procesora, zgodnie z obciążeniem procesora.
Ustawienie trybu procesora Umożliwia wybór trybu procesora (Turbo, Standardowy, Power Saving Oszczędzanie energii). Stuknij w celu zaznaczenia Tryb Automatyczny i wykonywania automatycznej zmiany szybkości procesora zgodnie z obciążeniem procesora. Ustawienie USB Umożliwia ustawienie trybu połączenia USB.
Jasność LCD Reguluje jasność LCD na zasilaniu bateryjnym i na zasilaniu zewnętrznym. Bateria Wyświetla stan zasilania bateryjnego. 120 Ustawienia zaawansowane umożliwiają ustawienie czasu wyłączania urządzenia, gdy nie jest używane.
Pamięć Wyświetla informację o łącznej, wykorzystanej i wolnej pojemności pamięci. Pamięć na karcie pamięci Wyświetla informację o łącznej, wykorzystanej i wolnej pojemności pamięci na karcie pamięci.
Programy działające w pamięci Umożliwia uaktywnienie lub zatrzymanie programów działających w pamięci. WAŻNE: Po wyjściu z działającego programu, jest on w rzeczywistości minimalizowany, a program pozostaje w pamięci. Użycie tej opcji zapobiega działaniu w tle programów. Ustawienia Umożliwia wybór elementów wyświetlanych w menu podręcznym Ustawienia ASUS.
Dodatek • Uwagi • Informacje kontaktowe 123
Uwagi Wymienne baterie Jeśli dostarczone urządzenie posiada wymienną baterię oraz jeśli wymiana baterii na baterię nieprawidłowego typu może spowodować wybuch (np.
Dostęp operatora poprzez użycie narzędzia Jeśli w celu uzyskania dostępu do OBSZARU DOSTĘPU OPERATORA potrzebne jest NARZĘDZIE, użycie tego narzędzia nie powinno umożliwiać dostępu przez OPERATORA do wszystkich innych wnęk w obrębie tego niebezpiecznego obszaru lub powinny zawierać oznaczenia zakazujące dostępu przez OPERATORA. Przyjęte oznaczenie w przypadku niebezpieczeństwa porażenia prądem elektrycznym to (ISO 3864, Nr 5036).
OSTRZEŻENIE Użytkownik powinien wyłączyć urządzenie w miejscach szczególnie narażonych na niebezpieczeństwo wybuchu takich jak, stacje benzynowe, magazyny substancji chemicznych i środków wybuchowych.
ASUS Adres: 15 Li-Te Road, Peitou, Taipei, Taiwan Telefon: 886-2-2894-3447; Faks: 886-2-2890-7698 Deklaracja Niniejszym deklarujemy, że kody IMEI dla tego produktu, P535, są niepowtarzalne dla każdego modułu i przydzielone wyłącznie temu modelowi. Kod IMEI dla każdego modułu jest ustawiany fabrycznie, nie może zostać zmieniony przez użytkownika i jest zgodny z właściwą integralnością IMEI, odnoszącą się do wymagań wyrażonych w standardach GSM.
Informacje kontaktowe ASUSTeK COMPUTER INC. (Tajwan) Hotline: 0800-093-456 (połączenia bezpłatne wyłącznie z Tajwanu) Faks: 886-2-2895-9254 E-mail: http://vip.asus.com/eservice/techserv.aspx WWW: http://tw.asus.com ASUSTeK COMPUTER INC. (Region Azji i Pacyfiku) Hotline: 886-2-2894-3447 Faks: 886-2-2890-7698 E-mail: http://vip.asus.com/eservice/techserv.aspx WWW: http://www.asus.com ASUS COMPUTER GmbH (Niemcy/Austria) Hotline: +49-2102-9599-10 Faks: +49-2102-9599-11 E-mail: http://www.asus.