Owner's manual

Software Guide
Parallel Port
The options for "Onboard Parallel Port" are:
3BCH/IRQ7
378H/IRQ7
278H/IRQ5
Disabled
Default setting
This line controls the on-board parallel port and connector, set
ting the port address and IRQ assignment or disabling the port. It
should be unnecessary to change the default setting.
Parallel Port Mode
The options for "Parallel Port Mode" are:
Normal Default setting
EPP
ECP default DMA 3
ECP&EPP
If you want to use one of the parallel port enhancements listed,
set this line for the enhanced mode your peripheral supports. "ECP"
automatically sets the "ECP DMA Select" line to "3", where it is oth
erwise set to "Disabled", and cannot be set independently.
3-21