Owner's manual

Software Guide
IDE HDD Auto Detection Screen
ROM PCT/ISA BIOS(PI-55SP4)
CMOS SETUP UTILITY
AWARD SOFTWARE,INC.
HARD DISKS TYPE SIZE CYLS HEADS PRECOMP LANDZ SECTOR MODE
Primary Master:
Select Primary Master Option (N=Skip)? N
OPTIONS SIZE CYLS. HEADS PRECOMP LANDZONE SECTORS MODE
1(Y) 307 790
15 65535
790
57 NORMAL
Note: If you are setting up a hard disk that supports LBA mode,
three lines wiU appear in the parameter box. Choose the line that lists
LBA for an LBA drive. Do not choose Large or Normal.
Important!: This utility will only detect one set of parameters for
an IDE hard drive. Some IDE drives can use more than one set. This
is not a problem if the drive is new and there is nothing on it. If the
hard disk drive is already fuUy formatted when you install it, and dif
ferent parameters than those detected here were used, you will have
to enter them manually.
If the parameters listed don't match the ones used when the drive
was formatted, the drive won't be readable. If the auto-detected pa
rameters displayed do not match the ones that should be used for
your drive, do not accept them. Press the <N> key to reject the val
ues and enter the correct ones manually from the Standard CMOS
Setup screen.
3-27