User Guide

ManualsBrandsASUS ManualsOtherP5B-E

RAID AP Utility User Guide Revision 1.0 2005/12/20

JMB360/1/3/5/6

JMB36X

PCI Express to SATA II/PATA

Host Controller

RAID AP Utility User Guide

Rev. 1.0

JMicron Technology Corporation

4F, No.18, Prosperity 2

Road,

Science Based Industrial Park, Hsinchu, Taiwan, R.O.C

http://www.jmicron.com

Summary of content (26 pages)

PAGE 1
JMB360/1/3/5/6 JMB36X PCI Express to SATA II/PATA Host Controller RAID AP Utility User Guide Rev. 1.0 JMicron Technology Corporation 4F, No.18, Prosperity 2nd Road, Science Based Industrial Park, Hsinchu, Taiwan, R.O.C http://www.jmicron.com RAID AP Utility User Guide Revision 1.0 Copyright © 2005 JMicron Inc. All rights reserved.
PAGE 2
JMB360/1/3/5/6 © Copyright JMicron Technology, 2005. All Rights Reserved. Printed in Taiwan 2005 JMicron and the JMicron Logo are trademarks of JMicron Technology Corporation in Taiwan and/or other countries. Other company, product and service names may be trademarks or service marks of others. All information contained in this document is subject to change without notice.
PAGE 3
JMB360/1/3/5/6 1. Overview JMicron JMB360/1/3/5/6 is product family that includes SATA II and PATA Host Controller. They are one-lane PCI Express to 1/2-port SATA II and 1/2-port PATA Host Controller. The table below shows the brief feature lists of JMB36X product family.
PAGE 4
JMB360/1/3/5/6 Step 1: Left-click the “Show Disks” button and the information of all hard disks will display on the right side of the window. RAID AP Utility User Guide Revision 1.0 Copyright © 2005 JMicron Inc. All rights reserved.
PAGE 5
JMB360/1/3/5/6 Step 2: Left-click the name of the disk array and the information of all hard disks of the selected disk array will display on the right side of the window. The information of the disk array will also display on the lower-left part of the window. RAID AP Utility User Guide Revision 1.0 Copyright © 2005 JMicron Inc. All rights reserved.
PAGE 6
JMB360/1/3/5/6 2. Creating RAID JMRaidTool supports the creation of RAID 0, 1, 0+1, JBOD. Step 1: Left-click the “New Disk Array” button. RAID AP Utility User Guide Revision 1.0 Copyright © 2005 JMicron Inc. All rights reserved.
PAGE 10
JMB360/1/3/5/6 Step 5: Select the block size (The block size is selectable only with RAID 0 or 0+1 configurations). RAID AP Utility User Guide Revision 1.0 Copyright © 2005 JMicron Inc. All rights reserved.
PAGE 15
JMB360/1/3/5/6 3. Deleting RAID Step 1: Right-click the name of the disk array you want to delete and the “Remove” menu will appear. RAID AP Utility User Guide Revision 1.0 Copyright © 2005 JMicron Inc. All rights reserved.
PAGE 16
JMB360/1/3/5/6 Step 2: A warning message appears to remind you that the data will be lost. Press the “Yes” button if you really want to delete the disk array. RAID AP Utility User Guide Revision 1.0 Copyright © 2005 JMicron Inc. All rights reserved.
PAGE 18
JMB360/1/3/5/6 3. Rebuilding RAID RAID 1, 0+1 can be rebuilt while RAID 0, JBOD cannot be rebuilt. Step 1: Right-click the name of the disk array you want to rebuild and the “Rebuild” menu will appear. RAID AP Utility User Guide Revision 1.0 Copyright © 2005 JMicron Inc. All rights reserved.
PAGE 25
JMB360/1/3/5/6 4. Selecting Controller If there are two JMicron RAID controllers, you can select any one of them. Step 1: Left-click the “Select Raid Controller” button. RAID AP Utility User Guide Revision 1.0 Copyright © 2005 JMicron Inc. All rights reserved.