Specifications

4-24 Chapter 2: BIOS setup
Sorth Bridge chipset Conguration
PCIEx16_2 Force [Auto]
Sorth Bridge Config uration
PCIEx16_2 Force [Auto]
Allows you to manually adjust PCI-E x 16_2 conguration.
Conguration options: [Auto] [x2 Mode (compatible)] [x4 Mode (fast)]
If you set PCIEx16_2 to x4 mode, the PCIEx1_1 will be disabled.
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Conguration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
Internal Graphic Mode Select [Enabled, 8MB]
Allows you to select the amount of system memory used by the Internal graphics
device. Conguration options: [Disabled] [Enabled,1MB] [Enabled, 8MB]
PEG Link Mode [Auto]
Sets the PCI Express graphics link mode. Setting this item to [Auto] allows the
motherboard to automatically adjust the PCI Express graphics link mode to the
correct frequency based on the system conguration. Four additional settings are
available for overclocking the PEG Link Mode. Conguration options: [Auto] [Slow]
[Normal] [Fast] [Faster]