User’s Manual

4-16

    
󰛌󰌷󰖌󰌐󰛌󰌷󰖌󰌐󰛌󰌷󰖌󰌐󰌷󰖌󰌐󰌷󰖌󰌐
󰅞󰉍󰅞󰉍󰅞󰉍󰅞󰉍󰅞󰉍󰅞󰉍󰅞󰉍󰉍󰉍

 󰛌󰊚󰌷󰄑󰌷󰄑󰌷󰄑
 
       
󰆸󰌐󰉠󰆸󰌐󰉠󰆸󰌐󰉠
󰎰󰎰

󰛌  󰌷󰌐  󰌷󰆸󰌐  󰌷󰌐  󰌷󰆸󰌐󰌷󰌐󰌷󰆸󰌐
󰉠󰍑󰁊󰌷󰌐󰍑󰁊󰌷󰌐󰌷󰌐

Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power Boot Tools Exit
[X.M.P.]
When X.M.P. is enabled
the CPU FSB frequency,
CPU ratio and memory
parameters will be
optimized automatically
CongureSystemPerformanceSettings
Ai Overclock Tuner [Auto]
CPU Ratio Control [Auto]
FSB Strap to North Bridge [Auto]
DRAM Frequency [Auto]
DRAM Command Rate [Auto]
DRAM CMD Skew on Channel A [Auto]
DRAM CMD Skew on Channel B [Auto]
DRAM CLK Skew on Channel A [Auto]
DRAM CLK Skew on Channel B [Auto]
DRAM Timing Control [Auto]
1st Information : 6-6-6-15-4-36-6-4
2nd Information : 8-4-6-4-7-4-7
3rd Information : 15-6-1-7-7
DRAM Static Read Control [Auto]
DRAM Dynamic Write Control [Auto]
Ai Clock Twister [Auto]
Ai Transaction Booster [Auto]
v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.
C/P : A1 A2 A3 A4 A5 |
LVL : 11 11 11 11 11
**** Please key in voltage numbers directly! ****
CPU Voltage [Auto]
CPU GTL Voltage Reference [Auto]
CPU PLL Voltage [Auto]
FSB Termination Voltage [Auto]
DRAM Voltage [Auto]
NB Voltage [Auto]
NB GTL Voltage Reference [Auto]
SB voltage [Auto]
Clock Over-Charging Voltage [Auto]
*************************************************
Load-Line Calibration [Auto]
CPU Spread Spectrum [Auto]
PCIE Spread Spectrum [Auto]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit