Motherboard P5GD1
T1673 © 2004 2
• • • • • • • • • • • • 7
• • • • • 8
™ 1 2 Jumper Mode 2 3 Jumper Free (Default) 9
P5GD1-TAYZ 6 10839 11036 11XX11XX11 10 0
1-1
® ® ® ® ® ® ® 1-2
® ® ® ® 1-3
1-4
P5GD1 P5GD1 Onboard LED SB_PWR ON Standby Power OFF Powered Off 2-1
P5GD1 2-2
24.5cm (9.6in) KBPWR ATX12V SPDIF_O LGA775 COM1 30.5cm (12.
2-4
2-5
• • P5GD1 P5GD1 Socket 775 A B 2-6
2-7
A B 2-8
• • • • • 2-9
2-10
CPU_FAN GND CPU FAN PWR CPU FAN IN CPU FAN PWM P5GD1 2-11
P5GD1 184-Pin DDR DIMM Sockets 2-12 DIMM_B2 DIMM_B1 DIMM_A2 DIMM_A1 P5GD1
256MB 512MB 256MB 512MB 256MB 512MB 512MB 256MB 512MB 256MB 512MB 256MB 512MB 256MB 512MB 256MB 512MB 256MB 512MB 256MB 512MB 512MB KINGSTON KINGSTON KINGSTON KINGSTON KINGSTON KINGSTON KINGSTON SAMSUNG SAMSUNG SAMSUNG SAMSUNG Hynix Hynix MICRON MICRON Infineon Infineon Infineon Infineon CORSAIR CORSAIR CORSAIR KVR400X64C3A/256 KVR400X64C3A/512 KVR400X64C3A/256 KVR400X64C3A/512 KVR400X64C3A/256 KVR400X64C3A/512 KHX3200A/512 M368L3223ETM-CCC M368L6423ETM-CCC M368L3223FTN-CCC M368L6423FTN-CCC HYMD232646B8J-
256MB 512MB 256MB 512MB 256MB 256MB 512MB 256MB 512MB 1024MB 256MB 512MB 256MB 512MB 256MB 512MB 256MB 512MB 256MB 512MB 256MB 512MB 512MB 256MB 512MB 256MB 512MB 512MB 1024MB 256MB 512MB 256MB 512MB 256MB 512MB 256MB 512MB 256MB 512MB 256MB 512MB 256MB 512MB 256MB 512MB 256MB 512MB 2-14 GEIL GEIL GEIL GEIL TwinMOS TwinMOS TwinMOS Transcend Transcend Transcend Transcend Transcend Transcend Transcend A DATA A DATA A DATA A DATA A DATA A DATA Winbond Winbond PSC PSC PSC KINGMAX KINGMAX ATP ATP NANYA NANYA B
2-15
2-16
A B C D E F G H 2-17
2-18
CLRTC P5GD1 1 2 P5GD1 Clear RTC RAM Normal (Default) 2 3 Clear CMOS 2-19
USBPW12 USBPW34 2 3 1 2 +5V (Default) USBPW56 USBPW78 P5GD1 1 2 P5GD1 USB device wake-up 2-20 +5VSB +5V (Default) 2 3 +5VSB
KBPWR 1 2 +5V 2 3 +5VSB (Default) P5GD1 P5GD1 Keyboard power setting 2-21
1 2 3 4 5 6 7 8 14 13 12 11 10 9 RJ45 ACT/LNK 2-22 SPEED
™ ™ ™ 2-23
FLOPPY P5GD1 PIN 1 P5GD1 Floppy disk drive connector • • PRI_IDE P5GD1 P5GD1 IDE connector 2-24 PIN 1
SEC_RAID P5GD1 PRI_RAID PIN 1 P5GD1 RAID connectors • • • • 2-25
SATA2 P5GD1 SATA1 P5GD1 SATA connectors • • • • • 2-26 ® GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXP2 RSATA_RXN2 GND GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXP1 RSATA_RXN1 GND SATA4 SATA3 GND RSATA_TXP4 RSATA_TXN4 GND RSATA_RXP4 RSATA_RXN4 GND GND RSATA_TXP3 RSATA_TXN3 GND RSATA_RXP3 RSATA_RXN3 GND
CPU_FAN GND CPU FAN PWR CPU FAN IN CPU FAN PWM PWR_FAN P5GD1 GND +12V Rotation CHA_FAN P5GD1 Fan connectors GND +12V Rotation 2-27
P5GD1 USB 2.
• • • • • • ATX12V +12V DC GND +12V DC GND P5GD1 P5GD1 ATX power connectors EATXPWR +3 Volts +12 Volts +12 Volts +5V Standby Power OK Ground +5 Volts Ground +5 Volts Ground +3 Volts +3 Volts Ground +5 Volts +5 Volts +5 Volts -5 Volts Ground Ground Ground PSON# Ground -12 Volts +3 Volts 2-29
P5GD1 GAME connector 2-30 +5V J2B1 J2CX MIDI_OUT J2CY J2B2 MIDI_IN P5GD1 +5V J1B1 J1CX GND GND J1CY J1B2 +5V P5GD1 CD P5GD1 CD audio connector GAME Right Audio Channel Ground Ground Left Audio Channel
Chassis Signal GND P5GD1 +5VSB_MB CHASSIS (Default) AAFP PORT1 L PORT1 R PORT2 R SENSE_SEND PORT2 L P5GD1 SENSE2_RETUR GND PRESENCE# SENSE1_RETUR P5GD1 Chassis intrusion connector P5GD1 Analog front panel connector 2-31
SPEAKER +5V Ground Ground Speaker PLED- PLED+ PLED IDE_LED P5GD1 System Panel Connector • • • • • 2-32 Reset Ground PWR Ground IDE_LED+ IDE_LED- PANEL P5GD1 RESET PWRSW
3-1
3-2
4-1
EZFlash starting BIOS update Checking for floppy... EZFlash starting BIOS update Checking for floppy... Floppy found! Reading file “P5GD1.ROM”. Completed. Start erasing.......| Start Programming...| Flashed successfully. Rebooting.
• • A:\>afudos /oOLDBIOS1.ROM Main filename Extension name A:\>afudos /oOLDBIOS1.ROM AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading flash ..... done A:\> 4-3
A:\>afudos /iP5GD1.ROM A:\>afudos /iP5GD1.ROM AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading file ..... done Erasing flash .... done Writing flash .... 0x0008CC00 (9%) A:\>afudos /iP5GD1.ROM AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading file ..... done Erasing flash .... done Writing flash .... 0x0008CC00 (9%) Verifying flash .. done A:\> 4-4
Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy found! Reading file “P5GD1.ROM”. Completed. Start flashing...
Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy not found! Checking for CD-ROM... CD-ROM found. Reading file “P5GD1.ROM”. Completed. Start flashing...
4-7
4-8
4-9
4-10
System Time System Date Legacy Diskette A Language Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Third IDE Master Fourth IDE Master IDE Configuration System Information [11:10:19] [Thu 03/27/2003] [1.44M, 3.5 in] [English] :[ST320413A] :[ASUS CD-S340] :[Not Detected] :[Not Detected] :[Not Detected] :[Not Detected] Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time.
Advanced Chipset settings WARNING: Setting wrong values in the sections below may cause system to malfunction. 4-12 Configure DRAM Timing by SPD Memory Acceleration Mode DRAM Idle Timer DRAm Refresh Rate [Enabled] [Auto] [Auto] [Auto] Graphic Adapter Priority Graphics Aperture Size Spread Spectrum [AGP/PCI] [ 64 MB] [Enabled] ICH Delayed Transaction [Enabled] MPS Revision [1.
System Time System Date Legacy Diskette A Language Primary IDE Master Primary IDE Slave Third IDE Master Third IDE Slave Fourth IDE Master Fourth IDE Slave IDE Configuration [11:51:19] [Thu 05/07/2004] [1.44M, 3.
Primary IDE Master Device : Hard Disk Vendor : ST320413A Size : 20.
IDE Configuration Configure SATA As Onboard IDE Operate Mode Enhanced Mode Support On [Standard IDE] [Enhanced Mode] [S-ATA] IDE Detect Time Out (Sec) [35] 4-15
4-16
AMIBIOS Version : 08.00.10 Build Date : 04/07/04 Processor Type Speed Count : Genuine Intel(R) CPU 3.
Configure CPU. JumperFree Configuration LAN Cable Status USB Configuration CPU Configuration Chipset Onboard Devices Configuration PCI PnP Speech Configuration Enter F1 F10 ESC Configure System Frequency/Voltage 4-18 AI Overclocking DRAM Frequency [Auto] [Auto] CPU Clock Spread Spectrum PCIE Clock Spread Spectrum [Auto] [Auto] Select Screen Select Item Go to Sub-screen General Help Save and Exit Exit Select the target CPU frequency, and the relevant parameters will be auto-adjusted.
4-19
4-20 FSB 800 200 MHz FSB 533 133 MHz
POST Check LAN cable LAN Cable Status Pair Status 1-2 3-6 4-5 7-8 N/A N/A N/A N/A 1-2 3-6 4-5 7-8 N/A N/A N/A N/A [Disabled] Length 4-21
USB Configuration Module Version - 2.23.2-9.4 USB Devices Enabled: None USB Function Legacy USB Support USB 2.
Configure Advanced CPU settings Manufacturer: Brand String: Frequency : FSB Speed : Cache L1 Cache L2 Cache L3 Intel Genuine Intel(R) CPU 3.20GHz 2800 MHz 800 MHz : 16 KB : 1024 KB : 0 KB Ratio Status: Unlocked Ratio Actual Value : 14 Ratio CMOS Setting: VID CMOS Setting: Max CPUID Value Limit: Enhanced C1 Control CPU Internal Thermal Control [ 8] [ 45] [Disabled] [Auto] [Auto] Hyper Threading Technology [Enabled] Sets the ratio between CPU Core Clock and the FSB Frequency.
Advanced Chipset Settings Configure DRAM Timing by SPD [Enabled] Booting Graphic Adapter Priori [PCI Express/PCI] PEG Buffer Length 4-24 [Auto]
4-25
Configure Win627EHF Super IO Chipset Azalia Controller Front Panel Support Type Onboard 1394 Controller Onboard PCIEX GbE LAN LAN Option ROM Onboard PCI GbE LAN PCI LAN Option ROM Onboard WIFI Controller ITE8212F Controller Detecting Device Time Silicon Image Controller [Enabled] [AC’97] [Enabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [IDE Mode] [Quick Mode] [Enabled] Serial Port1 Address Serial Port2 Address Parallel Port Address Parallel Port Mode ECP Mode DMA Channel Parallel Port IRQ Onb
4-27
Advanced PCI/PnP Settings WARNING: Setting wrong values in below sections may cause system to malfunction.
4-29
Suspend Mode Repost Vedio on S3 Resume ACPI 2.0 Support ACPI APIC Support APM Configuration Hardware Monitor 4-30 [S1 (POS) only] [No] [No] [Enabled] Configure CPU.
APM Configuration Power Button Mode [On/Off] Enabled or disable APM.
4-32
Hardware Monitor CPU Temperature MB Temperature [51ºC/122.5ºF] [41ºC/105.5ºF] CPU Fan Speed CPU Q-Fan Control Chassis Fan Speed Chassis Q-Fan Control Power Fan Speed [3813 RPM] [Disabled] [N/A] [Disabled] [N/A] VCORE Voltage 3.3V Voltage 5V Voltage 12V Voltage [ 1.320V] [ 3.345V] [ 5.094V] [11.
4-34
APM Configuration Boot Device Priority Boot Settings Configuration Security Enter F1 F10 ESC Select Screen Select Item Go to Sub-screen General Help Save and Exit Exit Boot Device Priority 1st Boot Device 2nd Boot Device 3rd Boot Device [1st FLOPPY DRIVE] [PM-ST330620A] [PS-ASUS CD-S360] 4-35
Boot Settings Configuration Quick Boot Full Screen Logo AddOn ROM Display Mode Bootup Num-Lock PS/2 Mouse Support Wait For ‘F1’ If Error Hit ‘DEL’ Message Display Interrupt 19 Capture 4-36 [Enabled] [Enabled] [Force BIOS] [On] [Auto] [Enabled] [Enabled] [Disabled] Allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system.
Security Settings Supervisor Password User Password : Not Installed : Not Installed to change password. again to disabled password.
Security Settings Supervisor Password User Password 4-38 : Not Installed : Not Installed Change Supervisor Password User Access Level Change User Password Clear User Password Password Check [Setup] Boot Sector Virus Protection [Disabled] [Full Access] Select Screen Select Item
Exit Options Exit & Save Changes Exit & Discard Changes Discard Changes Load Setup Defaults Exit system setup after saving the changes. F10 key can be used for this operation.
4-40
5-1
5-2
5-3
5-4
5-5
5-6
5-7
5-8
5-9
• • • 5-10
® 5-11
5-12
5-13
• ® • 5-14
5-15
® 5-16
5-17
® ® ® ® Intel(R) Application Accelerator RAID Option ROM v4.0.0.6211 Copyright(C) 2003-04 Intel Corporation. All Rights Reserved. [ MAIN MENU ] 1. 2. 3. 4. Create RAID Volume Delete RAID Volume Reset Disks to Non-RAID Exit [ DISK/VOLUME INFORMATION ] RAID Volumes: None defined. Non-RAID Disks: Port Drive Model 0 ST380013AS 1 ST380013AS [ 5-18 ]-Select Serial # xxxxxxxx xxxxxxxx [ESC] Exit Size 74.5GB 74.
[ ]-Change [TAB]-Next [ESC] Previous Menu [Enter]-Select Copyright(C) 2003 Intel Corporation. All Rights Reserved. v3.x.x.xxxx [ CREATE ARRAY MENU ] Name: RAID Level: Strip Size: Capacity: RAID_Volume1 RAID0(Stripe) 128KB 149.0GB Create Volume [ HELP ] Enter a string between 1 and 16 characters in length taht can be used to uniquely identify the RAID volume. This name is case sensitive and can not contain special characters.
Copyright(C) 2003 Intel Corporation. All Rights Reserved. v3.x.x.xxxx [ DELETE ARRAY MENU ] Name Level Drives RAID_Volume1 RAID0(Stripe) 2 Capacity Status 149.0GB Normal Bootable Yes [ HELP ] Deleting a volume will destroy the volume data on the drive(s) and cause any member disks to become available as non-RAID disks.
[ RESET RAID DATA ] Resetting RAID data will remove the internal RAID structures from the selected RAID disks. By removing these structures the drive will revert back to a Non-RAID disk. WARNING: Resetting a disk causes all data on the disk to be lost. Port Drive Model 0 STXXXXXXXXX 1 STXXXXXXXXX Serial # XXXXXXXX XXXXXXXX Size XX.0GB XX.
® ® IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc. [MAIN MENU] Auto Configuration...........[ 1 ] Define RAID..................[ 2 ] Delete RAID..................[ 3 ] Rebuild RAID.................[ 4 ] RAID Card Configuration......[ 5 ] [1]..
[1]..[5] Select [ESC] Exit IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc. [ Auto Configuration Menu ] Setup Array Type as: RAID 0 [ Array Configuration ] RAID Mode................................ Stripe Un-used Drive(s)......................... 4 Drive(s) in Array........................ 0 Array Capacity (size in MB)..............
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc. [ Define RAID Menu ] Array No Array Mode Drive No Size(MB) Status Array 0 ---- ---- ----- ----- Array 1 ---- ---- ----- ----- Array 2 ---- ---- ----- ----- Array 3 ---- ---- ----- ----- ∗ : Capacity (GB) [↑] Up [↓] Down [Space] Boot Array ♦ : Bootable Array [Enter] Select [ESC] Exit IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc. [ Rebuild RAID Menu ] Array No Array Mode Drive No Size(MB) Status Array 0 Stripe 4 XXXXXX Functional Array 1 Mirror 2 XXXX Functional Array 2 ---- ---- ----- ----- Array 3 ---- ---- ----- ----- ∗ : Capacity (GB) [↑] Up [↓] Down [Enter] Select ♦ : Bootable Array [ESC] Exit IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
5-28