Motherboard P5GD2
T1738 © 2004 2
• • • • • • • • • • • • 7
• • • • • 8
™ 1 2 Jumper Mode 2 3 Jumper Free (Default) 9
P5GD2 -TAYZ 6 10839 11036 11XX11XX11 10 0
® ® ® ® ® ® ® ® 11
1-1
® ® ® ® ® ® ® ® 1-2
® ® ® ® 1-3
1-4
1-5
1-6
P5GD2 R SB_PWR1 ON Standby Power OFF Powered Off P5GD2 Onboard LED 2-1
R 2-2 P5GD2
2-3
2-4 USB2.0 24.5cm (9.6in) CHASSIS1 PANEL1 30.5cm (12.
2-5
2-6
® ® • ® • • P5GD2 • R P5GD2 Socket 775 2-7
A B 2-8
A B ® ® ® ® ® 2-9
® ® • ® • ® • 2-10 ® ® ®
P5GD2 CPU_F R P5GD2 CPU Fan connector 2-11
P5GD2 184-Pin DDR DIMM sockets • • • • 2-12 DIMM_A2 DIMM_A1 P5GD2 R
256MB SAMSUNG M378T3253FG0-CD5 SS K4T56083QF-GCD5 • • • 512MB SAMSUNG M378T6553BG0-CD5 SS K4T51083QB-GCD5 • • • 512MB SAMSUNG M378T6453FG0-CD5 DS K4T56083QF-GCD5 • • • 1024MB SAMSUNG M378T2953BG0-CD5 DS K4T51083QB-GCD5 • • • 512MB Infineon HYS64T64000GU-3.
2-14 1024MB SAMSUNG M378T2953BG0-CD5 DS K4T51083QB-GCD5 • • • 512MB SAMSUNG M378T6453FG0-CD5 DS K4T56083QF-GCD5 • • • 512MB Infineon HYS64T64000GU-3.7-A SS HYB18T512800AC37 • • • 512MB CORSAIR CM2X512-4200 DS N/A • • • 512MB MICRON MT16HTF6464AG-53EB2 DS 4FBIID9BQM • • • 1024MB MICRON MT16HTF12864AY-53EA1 DS 4JAIID9CRZ • • • 1024MB Kingston KVR533D2N4/1G DS E5108AB-5C-E • • 256MB Kingston KVR533D2N4/256 SS HYB18T512160AC-3.
2 3 1 • • 2 1 1 2-15
2-16
A B C D E F G H 2-17
2-18
P5GD2 CLRTC1 R 1 2 Normal (Default) 2 3 Clear CMOS P5GD2 Clear RTC RAM 2-19
P5GD2 USBPW12 USBPW34 3 2 2 1 +5V +5VSB (Default) R USBPW56 USBPW78 1 2 P5GD2 USB device wake-up 2-20 +5V (Default) 2 3 +5VSB
KBPWR1 P5GD2 1 2 +5V 2 3 +5VSB (Default) R P5GD2 Keyboard power setting 2-21
1 13 2-22 12 2 11 10 9 3 4 5 8 6 7
2-23
PIN 1 FLOPPY P5GD2 NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. R P5GD2 Floppy disk drive connector • • P5GD2 PRI_IDE1 R P5GD2 IDE connector 2-24 NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1.
SEC_RAID1 P5GD2 R PIN 1 PRI_RAID1 PIN 1 NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1.
P5GD2 SATA2 R SATA1 P5GD2 SATA connectors • • • • • 2-26 ® GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXP2 RSATA_RXN2 GND GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXP1 RSATA_RXN1 GND SATA4 SATA3 GND RSATA_TXP4 RSATA_TXN4 GND RSATA_RXP4 RSATA_RXN4 GND GND RSATA_TXP3 RSATA_TXN3 GND RSATA_RXP3 RSATA_RXN3 GND
• PWR_FAN1 R CHA_FAN2 GND +12V Rotation GND +12V Rotation P5GD2 CPU_FAN1 GND CPU FAN PWR CPU FAN IN CPU FAN PWM • Rotation +12V GND CHA_FAN1 P5GD2 Fan connectors 2-27
P5GD2 USB 2.
• • • • ® ® • ATX12V1 P5GD2 GND +12V DC R P5GD2 ATX power connectors GND +12V DC EATXPWR1 +3 Volts +12 Volts +12 Volts +5V Standby Power OK Ground +5 Volts Ground +5 Volts Ground +3 Volts +3 Volts Ground +5 Volts +5 Volts +5 Volts -5 Volts Ground Ground Ground PSON# Ground -12 Volts +3 Volts 2-29
P5GD2 CD Right Audio Channel Ground Ground Left Audio Channel R P5GD2 P5GD2 CD audio connector +5V J2B1 J2CX MIDI_OUT J2CY J2B2 MIDI_IN R P5GD2 Game connector 2-30 +5V J1B1 J1CX GND GND J1CY J1B2 +5V GAME1
Chassis Signal GND +5VSB_MB P5GD2 CHASSIS1 (Default) P5GD2 Chassis alarm lead AAFP P5GD2 Azalia-compliant pin definition R SENSE2_RETUR SENSE1_RETUR PRESENCE# GND PORT2 L SENSE_SEND PORT2 R PORT1 R PORT1 L AC’97-compliant pin definition MIC2 MICPWR Line out_R NC Line out_L AGND +5VA BLINE_OUT_R BLINE_OUT_L P5GD2 Front panel connector • • 2-31
PLED- PLED+ P5GD2 Reset Ground PWR Ground PANEL1 IDE_LED+ IDE_LED- R +5V Ground Ground Speaker SPEAKER PLED RESET IDE_LED PWR P5GD2 System panel connector • • • • • 2-32 * Requires an ATX power supply.
3-1
® ® ® ® 3-2
4-1
• • A:\>afudos /oOLDBIOS1.ROM A:\>afudos /oOLDBIOS1.ROM AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading flash ..... done Write to file ...ok A:\> 4-2
A:\>afudos /iP5GD2.ROM A:\>afudos /iP5GD2.ROM AMI Firmware Update Utility - Version 1.19(ASUS V2.07(03.11.24BB)) Copyright (C) 2003 American Megatrends, Inc. All rights reserved. WARNING!! Do not turn off power during flash BIOS Reading file ..... done Reading flash .... done Advance Check........ Erasing flash .... done Writing flash ....
A:\>afudos /iP5GD2.ROM AMI Firmware Update Utility - Version 1.19(ASUS V2.07(03.11.24BB)) Copyright (C) 2003 American Megatrends, Inc. All rights reserved. WARNING!! Do not turn off power during flash BIOS Reading file ..... done Reading flash .... done Advance Check......... Erasing flash ..... done Writing flash ..... done Verifying flash ... done Please restart your computer A:\> 4-4
Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy found! Reading file “P5GD2.ROM”. Completed. Start flashing...
Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy not found! Checking for CD-ROM... CD-ROM found! Reading file “P5GD2.ROM”. Completed. Start flashing...
EZFlash starting BIOS update Checking for floppy... EZFlash starting BIOS update Checking for floppy... Floppy found! Reading file “P5GD2.rom”. Completed. Start erasing.......| Start programming...| Flashed successfully. Rebooting.
4-8
4-9
4-10
4-11
System Time System Date Legacy Diskette A Language Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Third IDE Master Fourth IDE Master IDE Configuration System Information 4-12 [11:10:19] [Thu 03/27/2003] [1.44M, 3.5 in] [English] :[ST320413A] :[ASUS CD-S340] :[Not Detected] :[Not Detected] :[Not Detected] :[Not Detected] Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time.
System Time System Date Legacy Diskette A Language Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Third IDE Master Fourth IDE Master IDE Configuration [11:10:19] [Thu 03/27/2003] [1.44M, 3.5 in] [English] :[ST320413A] :[ASUS CD-S340] :[Not Detected] :[Not Detected] :[Not Detected] :[Not Detected] System Information Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time.
System Time System Date Legacy Diskette A Language Primary IDE Master Primary IDE Slave Third IDE Master Third IDE Slave Fourth IDE Master Fourth IDE Slave IDE Configuration System Information 4-14 [11:51:19] [Thu 05/07/2004] [1.44M, 3.
Primary IDE Master Device : Hard Disk Vendor : ST320413A Size : 20.
IDE Configuration Configure SATA As Onboard IDE Operate Mode Enhanced Mode Support On [Standard IDE] [Enhanced Mode] [S-ATA] IDE Detect Time Out (Sec) [35] ® 4-16
4-17
AMIBIOS Version : 08.00.10 Build Date : 04/07/04 Processor Type Speed Count : Genuine Intel(R) CPU 3.
Configure CPU. JumperFree Configuration LAN Cable Status USB Configuration CPU Configuration Chipset Onboard Devices Configuration PCI PnP Enter F1 F10 ESC Configure System Frequency/Voltage AI Overclocking DRAM Frequency [Auto] [Auto] Performance Mode [Auto] Select Screen Select Item Go to Sub-screen General Help Save and Exit Exit Select the target CPU frequency, and the relevant parameters will be auto-adjusted. Frequencies higher than CPU manufacturer recommends are not guaranteed to be stable.
4-20
4-21
FSB 800 200 MHz FSB 533 133 MHz POST Check LAN cable LAN Cable Status Pair Status 1-2 3-6 4-5 7-8 4-22 N/A N/A N/A N/A Length [Disabled]
USB Configuration Module Version - 2.23.2-9.4 USB Devices Enabled: None USB Function Legacy USB Support USB 2.
Configure Advanced CPU settings Manufacturer: Brand String: Frequency : FSB Speed : Cache L1 Cache L2 Cache L3 4-24 Intel Genuine Intel(R) CPU 3.
Advanced Chipset Settings Configure DRAM Timing by SPD Hyper Path 2 [Enabled] [Auto] Booting Graphic Adapter Priori [PCI Express/PCI] PEG Buffer Length Link Latency PEG Link Mode PEG Root Control Slot Power [Auto] [Auto] [Auto] [Auto] [Auto] + Select Screen Select Item Ch O ti 4-25
4-26
Configure Win627EHF Super IO Chipset HD Audio Controller Front Panel Support Type Onboard PCIEX GbE LAN LAN Option ROM Onboard PCIEX GbE LAN LAN Option ROM ITE8212F Controller Detecting Device Time [Enabled] [AC’97] [Enabled] [Disabled] [Enabled] [Disabled] [IDE Mode] [Quick Mode] Serial Port1 Address Parallel Port Address Parallel Port Mode ECP Mode DMA Channel Parallel Port IRQ Onboard Game/MIDI Port [3F8/IRQ4] [378] [ECP] [DMA3] [IRQ7] [Disabled] ® 4-27
4-28
Advanced PCI/PnP Settings WARNING: Setting wrong values in below sections may cause system to malfunction.
4-30
Suspend Mode Repost Video on S3 Resume ACPI 2.0 Support ACPI APIC Support [S1 (POS) only] [No] [No] [Enabled] Configure CPU.
APM Configuration Power Button Mode [On/Off] Restore on AC Power Loss [Power Off] Power On By RTC Alarm [Disabled] Power On By External Modems [Disabled] Power On By PCI Devices [Disabled] Power On By PS/2 Keyboard [Disabled] Keyboard Wakeup Password : Not Installed Power On By PS/2 Mouse [Disabled] 4-32 Enabled or disable APM.
4-33
Hardware Monitor 4-34 CPU Temperature MB Temperature [51ºC/122.5ºF] [41ºC/105.5ºF] CPU Fan Speed CPU Q-Fan Control Chassis Fan Speed Chassis Q-Fan Control Power Fan Speed [3813 RPM] [Disabled] [N/A] [Disabled] [N/A] VCORE Voltage 3.3V Voltage 5V Voltage 12V Voltage [ 1.320V] [ 3.345V] [ 5.094V] [11.
4-35
APM Configuration Boot Device Priority Boot Settings Configuration Security Enter F1 F10 ESC Boot Device Priority 1st Boot Device 2nd Boot Device 3rd Boot Device 4-36 [1st FLOPPY DRIVE] [PM-ST330620A] [PS-ASUS CD-S360] Select Screen Select Item Go to Sub-screen General Help Save and Exit Exit
Boot Settings Configuration Quick Boot Full Screen Logo AddOn ROM Display Mode Bootup Num-Lock PS/2 Mouse Support Wait For ‘F1’ If Error Hit ‘DEL’ Message Display Interrupt 19 Capture [Enabled] [Enabled] [Force BIOS] [On] [Auto] [Enabled] [Enabled] [Disabled] Allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system.
Security Settings Supervisor Password User Password : Not Installed : Not Installed Change Supervisor Password Boot Sector Virus Protection 4-38 [Disabled] to change password. again to disabled password.
Security Settings Supervisor Password User Password : Not Installed : Not Installed Change Supervisor Password User Access Level Change User Password Clear User Password Password Check [Setup] Boot Sector Virus Protection [Disabled] [Full Access] Select Screen Select Item 4-39
4-40
Exit Options Exit & Save Changes Exit & Discard Changes Discard Changes Load Setup Defaults Exit system setup after saving the changes. F10 key can be used for this operation.
4-42
5-1
5-2
5-3
5-4
5-5
5-6
5-7
5-8
5-9
5-10
• • • • 5-11
5-12
5-13
5-14
5-15
® ® ® ® ® ® 1 2 3 4 ® ® ® 5-16
® ® ® ® 5-17
® 5-18
® ® ® ® Intel(R) Application Accelerator RAID Option ROM v4.0.0.6211 Copyright(C) 2003-04 Intel Corporation. All Rights Reserved. [ MAIN MENU ] 1. 2. 3. 4. Create RAID Volume Delete RAID Volume Reset Disks to Non-RAID Exit [ DISK/VOLUME INFORMATION ] RAID Volumes: None defined. Non-RAID Disks: Port Drive Model 0 ST380013AS 1 ST380013AS [ ]-Select Serial # xxxxxxxx xxxxxxxx [ESC] Exit Size 74.5GB 74.
[ ]-Change [TAB]-Next [ESC] Previous Menu [Enter]-Select Intel(R) Application Accelerator RAID Option ROM v4.0.0.6211 Copyright(C) 2003-04 Intel Corporation. All Rights Reserved. [ CREATE ARRAY MENU ] Name: RAID Level: Disks: Strip Size: Capacity: RAID_Volume1 RAID0(Stripe) Select Disk 128KB 149.0GB [ HELP ] Enter a string between 1 and 16 characters in length taht can be used to uniquely identify the RAID volume. This name is case sensitive and can not contain special characters.
WARNING: ALL DATA ON SELECTED DISK WILL BE LOST. Are you sure you want to create this volume (Y/N) Intel(R) Application Accelerator RAID Option ROM v4.0.0.6211 Copyright(C) 2003-04 Intel Corporation. All Rights Reserved. [ DELETE ARRAY MENU ] Name RAID_Volume1 Level Drives RAID0(Stripe) 2 Capacity Status 149.0GB Normal Bootable Yes [ HELP ] Deleting a volume will destroy the volume data on the drive(s) and cause any member disks to become available as non-RAID disks.
[ VOLUME DELETE VERIFICATION ] ALL DATA IN THE VOLUME WILL BE LOST!! Are you sure you want to delete volume "RAID_Volume0"? (Y/N) [ RESET RAID DATA ] Resetting RAID data will remove the internal RAID structures from the selected RAID disks. By removing these structures the drive will revert back to a Non-RAID disk. WARNING: Resetting a disk causes all data on the disk to be lost. Port Drive Model 0 STXXXXXXXXX 1 STXXXXXXXXX Serial # XXXXXXXX XXXXXXXX Size XX.0GB XX.
® ® IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc. [MAIN MENU] Auto Configuration...........[ 1 ] Define RAID..................[ 2 ] Delete RAID..................[ 3 ] Rebuild RAID.................[ 4 ] RAID Card Configuration......[ 5 ] [1]..
[1]..[5] Select [ESC] Exit IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc. [ Auto Configuration Menu ] Setup Array Type as: RAID 0 [ Array Configuration ] RAID Mode................................ Un-used Drive(s)......................... 4 Drive(s) in Array........................ 0 Array Capacity (size in MB)..............
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc. [ Define RAID Menu ] Array No Array Mode Drive No Size(MB) Status Array 0 ---- ---- ----- ----- Array 1 ---- ---- ----- ----- Array 2 ---- ---- ----- ----- Array 3 ---- ---- ----- ----- ∗ : Capacity (GB) ↑] Up ↓] Down [↑ [↓ [Space] Boot Array ♦ : Bootable Array [Enter] Select [ESC] Exit IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc. [ Rebuild RAID Menu ] Array No Array Mode Drive No Size(MB) Status Array 0 Stripe 4 XXXXXX Functional Array 1 Mirror 2 XXXX Functional Array 2 ---- ---- ----- ----- Array 3 ---- ---- ----- ----- ∗ : Capacity (GB) ↑] Up [↑ [↓ ↓] Down [Enter] Select ♦ : Bootable Array [ESC] Exit IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
• • • ® 5-29
5-30
