Owner manual

ManualsBrandsAsus ManualsMotherboardP5GDC-V Deluxe

121

122

123

124

125

126

127

128

129

130

5-185-18

5-18

Chapter 5: Software supportChapter 5: Software support

Chapter 5: Software support

5.4.25.4.2

5.4.2

IntelIntel

Intel

®®

RAID configurations RAID configurations

RAID configurations

This motherboard supports RAID 0, RAID 1, and Intel

Matrix Storage

configurations for Serial ATA hard disks drives through the Intel

ICH6R

chipset. Use the Intel

Application Accelerator RAID Option ROM utility to

configure a disk array.

Setting the BIOS RAID itemsSetting the BIOS RAID items

Setting the BIOS RAID items

After installing the hard disk drives, make sure to set the necessary RAID

items in the BIOS before setting your RAID configuration.

To set the BIOS RAID items:

1. Boot the system and press <Del> during the Power-On Self-Test

(POST) to enter the BIOS Setup Utility.

2. From the

Main > IDE Configuration Main > IDE Configuration

Main > IDE Configuration menu in the BIOS, the

Configure SATA As Configure SATA As

Configure SATA As item as RAID.

3. Set the

OnBoard Serial-ATA BOOTROMOnBoard Serial-ATA BOOTROM

OnBoard Serial-ATA BOOTROM item as Enabled.

4. Save your changes and exit Setup.

Entering the IntelEntering the Intel

Entering the Intel

®®

Application Accelerator RAID Option Application Accelerator RAID Option

Application Accelerator RAID Option

ROM utilityROM utility

ROM utility

To enter the Intel

Application Accelerator RAID option ROM utility:

1. Boot up your computer.

2. During POST, press <Ctrl+I> to display the main menu of the utility.

[

DISK/VOLUME INFORMATION

]



RAID Volumes:

None defined.

Non-RAID Disks:

Port Drive Model Serial # Size Type/Status (Vol ID)

0 ST380013AS xxxxxxxx 74.5GB Non-RAID Disk

1 ST380013AS xxxxxxxx 74.5GB Non-RAID Disk

Intel(R) Application Accelerator RAID Option ROM v4.0.0.6211

[

MAIN MENU

]

1. Create RAID Volume

2. Delete RAID Volume

3. Reset Disks to Non-RAID

4. Exit

[ ]-Select

[ESC] Exit

[Enter]-Select Menu

The RAID BIOS setup screens shown in this section are for reference

only, and may not exactly match the items on your screen.