Owner manual

4-264-26

4-26

Chapter 4: BIOS setupChapter 4: BIOS setup

Chapter 4: BIOS setup

Graphic Adapter Priority [PCI Express/Int-VGA]Graphic Adapter Priority [PCI Express/Int-VGA]

Graphic Adapter Priority [PCI Express/Int-VGA]

Allows selection of the graphics controller to use as primary boot device.

Configuration options: [Internal VGA] [PCI Express/Int-VGA] [PCI Express/

PCI] [PCI/PCI Express] [PCI/Int-VGA]

Internal Graphics Mode Select [Enabled, 8 MB]Internal Graphics Mode Select [Enabled, 8 MB]

Internal Graphics Mode Select [Enabled, 8 MB]

Allows selection of the amount of system memory pre-allocated by the

internal graphics device. Configuration options: [Disabled] [Enabled, 1 MB]

[Enabled, 4 MB] [Enabled, 8 MB] [Enabled, 16 MB] [Enabled, 32 MB]

Fixed Graphic Memory Size [32 MB]

Allows selection of the size of graphic memory used by fixed mode.

Configuration options: [0 MB] [32 MB] [64 MB] [128 MB]

DVMT Graphic Memory Size [32 MB]

Allows selection of the size of graphic memory used by DVMT mode.

Configuration options: [0 MB] [32 MB] [64 MB] [128 MB] [224 MB]

PEG Buffer Length [Auto]PEG Buffer Length [Auto]

PEG Buffer Length [Auto]

Sets the PCI Express Graphics card buffer length.

Configuration options: [Auto] [Long] [Short]

Link Latency [Auto]Link Latency [Auto]

Link Latency [Auto]

Allows selection of link latency.

Configuration options: [Auto] [Slow] [Normal]

PEG Root Control [Auto]PEG Root Control [Auto]

PEG Root Control [Auto]

Allows selection of PEG root control.

Configuration options: [Auto] [Disabled] [Enabled]

Slot Power [Auto]Slot Power [Auto]

Slot Power [Auto]

Allows selection of slot power.

Configuration options: [Auto] [Light] [Normal] [Heavy] [Heavier]