User’s Manual

4-16
Chapter4:BIOSセ
BIOS SETUP UTILITY
Advanced
4.4 拡張
CPUその他のシデバイスの設定を変更
4.4.1 JumperFreeConguration
拡張メニーの設定変更はステムの誤動作の原因があ十分に
注意ださい。
Congure System Frequency/Voltage
Ai Overclocking [Auto]
CPU Ratio Control [Auto]
DRAM Frequency [Auto]
DRAM Timing Control [Auto]
DRAM Static Read Control [Auto]
Transaction Booster [Auto]
Clock Over-Charging Mode [Auto]
CPU Spread Spectrum [Auto]
PCIE Spread Spectrum [Auto]
Select the target CPU
frequency, and the
relevant parameters
will be auto-adjusted.
Frequencies higher
than CPU manufacturer
recommends are not
guaranteed to be
stable. If the system
becomes unstable,
return to the default.
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
JumperFree Conguration
USB Conguration
CPU Conguration
Chipset
Onboard Devices Conguration
PCIPnP
AiOverclocking[Auto]
CPUオプシを選CPU内部周波数を設定すがで
Manual
ーバーの値を手動で設定
Auto
に対最適な設定をロー
Standard
に対標準的な設定に
N.O.S.
ASUS非遅延オーバーステムの
負荷を検出ーマ自動的に向せま