Installation Guide
Chapter1: QuickStart
10
English
2. Install the standoffs to the matched
screw holes on the metal plate.
3. TheI/Oshieldedgespringsmay
damage the I/O ports. Be cautious
when installing the I/O shield.
4. Position the I/O side of the
motherboard toward the rear of the
chassis and place the motherboard
into the chassis.
5. Insertandlooselytighteneach
screwinadiagonalsequencerst.
After all the screws have been
inserted, drive the screws until
theyarenger-tight.
• Youmayremovethemetalslotcoversfortheexpansioncardsattheback
of the chassis before installig the motherboard. For some chassis models, it
mightbedifculttoremovetheexpansionslotcoveraftertheinstallation.
• DONOTover-tightenthescrews.Doingsomaydamagethemotherboard.