Installation Guide

ASUS Motherboard installation guide
13
English
1.7 Installing disk drives
1.7.1 PATA optical disk drive
1. Removethedummycoverand
slide the optical disk drive into the
bay.
2. Align the screws holes and secure
the disk drive with screws.
3. OrientandplugtheIDEcableinto
the optical drive. The red stripe on
theIDEcableisthepin1endand
should match the dimple marking
Pin1 on the optical drive.
4. Connect the 4‑pin power cable to
the optical drive.
5. Attach the audio cable to the
connector on the optical drive.
IDEcablesaredummy-proof.NeverforcetheIDEcableintotheconnector.