Installation Guide
Chapter1: QuickStart
18
English
1.7.5 SATA hard disk drive
1. Insert the SATA hard disk drive into
thebay.
2. Align the screws holes and secure
the disk drive with screws.
3. Orient and connect the SATA cable
to the hard disk drive. The cable can
onlytinonedirection.
4. Connect the SATA power cable to
the connector at the back of the
hard disk drive.
Notes for installing SATA hard disk drive
• Serial ATA (SATA) interface
provides higher data transmission
speed,and better voltage tolerance.
The narrow design of the SATA
cable also solves cabling issues
andallowsbetterairowinthe
chassis.
• The SATA power cable connector
is different from the traditional
4‑pin power connector. ASUS
motherboard bundles power adopter
cablesforyouincaseyourpower
supplyunitdoesnotincludethis
new connector.