Installation Guide

ASUS Motherboard installation guide
19
English
Toconnectthefrontpanelcables:
• RESET (Reset Switch)
• PLED(PowerLED)
• PWRSW(PowerSwitch)
• IDE_LED(IDEHardDiskActiveLED)
• SPEAKER (Speaker Connector)
1.8 Front panel cables
M2N-X
F_PANEL
PLED- PWR PLED+
Ground
GNDReset
IDELED+
IDELED-
HD LED RESET
PWRLED PWRBTN
P5B-E
®
*
Requires an ATX power supply.
PANEL
PLED-
PWR
+5V
Speaker
Ground
RESET
Ground
Reset
Ground
Ground
PWRSW
PLED+
IDE_LED-
IDE_LED+
IDE_LED
PLED SPEAKER
PIN1
PIN1
• Thefrontpanelcablesofyourchassismaydifferwithmodelsordesigns.
Connect these connectors to the motherboard according to the label.
• IftheLEDsdonotlightupandthepinloctioniscorrect,youmightmisplace
thegroundpinswiththesignalpins.Usuallythewhitewirestandsforthe
ground pins and the color‑coded wire for the signal pins.
• TheSPEAKER,RESETandPWRSWfrontpanelcableshavenospecic
orientation,whileIDE_LEDandPLEDcablesdo.Connectthethecable
PIN1 to the connector PIN1 on the motherboard.
• Thefrontpanelconnectorvarieswithyourmotherboardmodel,refertothe
user guide for more information.
20-8 pin front panel connector
10-1 pin front panel connector