User Guide

ASUS P5LD2-VASUS P5LD2-V
ASUS P5LD2-VASUS P5LD2-V
ASUS P5LD2-V
4-174-17
4-174-17
4-17
If you want to use the Serial ATA hard disk drives as Parallel ATA physical
storage devices, set this item to [Standard IDE].
If you want the Serial ATA hard disk drives to use the Advanced Host
Controller Interface (AHCI), set this item to [AHCI]. For details on AHCI, go
to: www.intel.com/support/chipsets/imst/sb/CS-012304.htm
www.intel.com/support/chipsets/imst/sb/CS-012305.htm
The SATA controller is set to Native mode when this item is set to [RAID]
or [AHCI].
The
Onboard IDE Operate Mode Onboard IDE Operate Mode
Onboard IDE Operate Mode Onboard IDE Operate Mode
Onboard IDE Operate Mode and sub-menu items appear only
when the
Configure SATA As Configure SATA As
Configure SATA As Configure SATA As
Configure SATA As item is set to [Standard IDE].
Onboard IDE Operate Mode [Enhanced Mode]Onboard IDE Operate Mode [Enhanced Mode]
Onboard IDE Operate Mode [Enhanced Mode]Onboard IDE Operate Mode [Enhanced Mode]
Onboard IDE Operate Mode [Enhanced Mode]
Allows selection of the IDE operation mode depending on the installed
operating system (OS). Set to [Enhanced Mode] if you are using native OS
including Windows
®
2000/XP. Configuration options: [Disabled]
[Compatible Mode] [Enhanced Mode]
If you are using a Serial ATA optical drive, set this item to [Compatible
Mode] before creating a boot disk using the support CD.
Enhanced Mode Support On [S-ATA]
Allows you to use
native OS native OS
native OS native OS
native OS on Serial ATA and Parallel ATA ports. It
is recommend that you do not change the default setting for better
OS compatibility. In this setting, you may use legacy OS on the Parallel
ATA ports only if you do not install any Serial ATA device.
The P-ATA+S-ATA and P-ATA options are for advanced users only. If
you set to any of these options and encountered problems, revert to
the default setting
S-ATAS-ATA
S-ATAS-ATA
S-ATA. Configuration options: [S-ATA+P-ATA]
[S-ATA] [P-ATA]
Combined Mode Option [Primary P-ATA +S-ATA]]
Allows you to choose the IDE ports to be used.
Configuration options: [Primary P-ATA +S-ATA] [S-ATA only] [P-ATA
only]
The S-ATA and P-ATA options are for advanced users only. If you set
to any of these options and encounter problems, revert to the default
setting [Primary P-ATA+S-ATA]. Configuration options: [S-ATA only]
[P-ATA only] [P-ATA+S-ATA]
Combined Mode Option Combined Mode Option
Combined Mode Option Combined Mode Option
Combined Mode Option item appears only when the
Onboard IDEOnboard IDE
Onboard IDEOnboard IDE
Onboard IDE
Operate Mode item is set to [Compatible Mode].