User’s Manual

2-26
第二章：BIO S 程序設 置
2.4.5 內置設備設置（OnBoard Devices Configuration）
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
Select Menu
Item Specic Help
Onboard Device Conguration
IDE Function Setup
Serial-ATA conguration
HD Audio Controller [Auto]
Front Panel Support Type [HD Audio]
Onboard nVidia LAN [Enabled]
Onboard LAN Boot ROM [Disabled]
Serial Port1 Address [3F8/IRQ4]
Parallel Port Address [378/IRQ7]
Parallel Port Mode [SPP]
x EPP Mode Select EPP1.7
x ECP Mode Use DMA 3
Phoenix-Award BIOS CMOS Setup Utility
Advanced
OnChip IDE Channel 0 [Enabled]
本項目用來開啟或關閉 OnChip IDE channel 0 控制器。設置值有：
[Disabled] [Enabled]
IDE DAM transfer access [Enabled]
本項目用來開啟或關閉 IDE DMA 傳輸權限。設置值有：[Disabled]
[Enabled]
Serial-ATA Controller [Enabled]
本項目用來開啟或關閉 Serial-ATA 控制器。設置值有：[Disabled]
[Enabled]
IDE Prefetch Mode [Enabled]
本項目用來開啟或 關 閉 IDE 預取 模 式 。設置 值 有 ：[Di s a bled ]
[Enabled]
IDE 功能設置
Select Menu
Item Specic Help
Phoenix-Award BIOS CMOS Setup Utility
Advanced
IDE Function Setup
OnChip IDE Channel0 [Enabled]
IDE DMA transfer access [Enabled]
Serial-ATA Controller [Enabled]
IDE Prefetch Mode [Enabled]