User's Manual
華碩 P5N64 WS Professional 主機板使用手冊
5-57
4. 這時會顯示 Create Array 的畫面。
5. 使用方向鍵選擇 RAID Level 選項,然後按 <Enter> 鍵確認並顯示可選擇的
RAID 設定種類。點選您欲建立的 RAID 設定種類,然後按 <Enter> 鍵。
在您選擇好 RAID 設定種類後,請再點選 NEXT 鈕來建立陣列。
• 可選擇建立的 RAID 設定種類,會依照您選擇的硬碟數量而
定。不能建立的 RAID 設定種類則會以灰色顯示。
• 我們建議您除了選擇在 Create Array 中的 RAID Level 所欲建
立的 RAID 設定種類外,其餘的請保留預設值。
Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd.
ENTER/SPACE:Select, ESC:Back/Exit
[Selection] [Controller] [ Devices ] [ RAID ]
RAIDCong
Select free disks to create
ID Port Disk Name Size Max Speed Status
*0 0 SAS : ST336754SS 36.6GB SAS 3.0 FREE
*1 1 SAS : ST336754SS 36.6GB SAS 3.0 FREE
NEXT
Create Array
Raid Level : RAID0
Max Size(MB) : 73240
Capacity(MB) : 73240
Stripe Size : 64KB
Quick Init : No
Cache Mode : WriteBack
Array Name :
Disks ID : 0 1
NEXT
Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd.
ENTER/SPACE:Select, ESC:Back/Exit
[Selection]
[Controller] [ Devices ] [ RAID ]
RAIDCong
Select free disks to create
ID Port Disk Name Size Max Speed Status
*0 0 SAS : ST336754SS 36.6GB SAS 3.0 FREE
*1 1 SAS : ST336754SS 36.6GB SAS 3.0 FREE
NEXT
Create Array
Raid Level : RAID0
Max Size(MB) : 146480
Capacity(MB) : 146480
Stripe Size : 64KB
Quick Init : No
Cache Mode : WriteBack
Array Name :
Disks ID : 0 1
NEXT
*RAID0
RAID1
RAID10