User’s Manual

4-28
第四章：BIOS程序設置
4.5.2PCI即插即用設備（PCIPnP）
Plug&PlayO/S[No]
當本項目設置為 [No] ，則可讓 BIOS 設置系統中所有的設備。而當設置
為[Yes]時，且您的系統安裝支持即插即用之操作系統時，操作系統會設置
即插即用設備且無須重新啟動。設置值有：[No][Yes]。
PrimaryDisplayAdapter[PCI]
當本項目可以讓您選擇用何種接口的圖像控制芯片作為啟動設備。設置值
有：[PCI][PCI-E]。
Select Menu
Item Specic Help
Select Yes if you are
using a Plug and Play
capable operating
system. Select No if
you need the BIOS to
congure non-boot
devices.
Phoenix-AwardBIOS CMOS Setup Utility
Advanced
PCIPnP
Plug & Play O/S [No]
Primary Display Adapter [PCI]
4.5.3內 置 設 備 設 置 （ O n B o a r d  D e v i c e s
Configuration）
Select Menu
Item Specic Help
Press [Enter] to set.
Phoenix-AwardBIOS CMOS Setup Utility
Advanced
F1:Help
↑↓
: Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit
→←
: Select Menu Enter: Select SubMenu F10: Save and Exit
Onboard Device Conguration
IDE Function Setup
Serial-ATA Conguration
HD Audio [Auto]
Front Panel Support Type [HD Audio]
Onboard 1st nVidia LAN [Enabled]
Onboard 2nd nVidia LAN [Enabled]
Onboard nVidia LAN Boot ROM [Disabled]
Onboard 1394 [Enabled]