User guide
ASUS P5N73-CM 1-31
1.10.2 Internal connectors
1. Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the provided oppy disk drive (FDD) signal cable. Insert
one end of the cable to this connector, then connect the other end to the
signal connector at the back of the oppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using an FDD cable with a covered Pin 5.
2. Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4)
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
drives.
P5N73-CM
SATA Connectors
R
GND
RSAT
A_TXP2
RSAT
A_TXN2
GND
RSAT
A_RXP2
RSAT
A_RXN2
GND
GND
RSAT
A_TXP3
RSAT
A_TXN3
GND
RSAT
A_RXP3
RSAT
A_RXN3
GND
GND
RSAT
A_TXP1
RSAT
A_TXN1
GND
RSAT
A_RXP1
RSATA_RXN1
GND
GND
RSAT
A_TXP4
RSAT
A_TXN4
GND
RSAT
A_RXP4
RSATA_RXN4
GND
SATA2
SATA3
SATA1
SATA4
P5N73-CM
P5N73-CM
Floppy Disk Drive Connector
R
NOTE:
Orient the red markings on
the floppy ribbon cable to PIN 1.
PIN1
FLOPPY
P5N73-CM