User's Manual

4-284-28
4-284-28
4-28
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setup
4.4.44.4.4
4.4.44.4.4
4.4.4
PEG Link ModePEG Link Mode
PEG Link ModePEG Link Mode
PEG Link Mode
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specific Help
Enhance performance on
PCIE serial graphics
card.
PEG Link Mode
PEG Link Mode [Auto]
PEG Root Control [Auto]
PEG Buffer Length [Auto]
Phoenix-Award BIOS CMOS Setup Utility
Advanced
PEG Link Mode [Disabled]PEG Link Mode [Disabled]
PEG Link Mode [Disabled]PEG Link Mode [Disabled]
PEG Link Mode [Disabled]
Sets the PCI Express graphics link mode. Setting this item to [Auto] allows
the motherboard to automatically adjust the PCI Express graphics link mode
to the correct frequency based on the system configuration. Four
additional settings are available for overclocking the PEG Link Mode.
Configuration options: [Auto] [Slow] [Normal] [Fast] [Faster]
PEG Root Control [Auto]PEG Root Control [Auto]
PEG Root Control [Auto]PEG Root Control [Auto]
PEG Root Control [Auto]
Allows you to enable or disable the PCI Express graphics root control.
Configuration options: [Auto] [Enabled] [Disabled]
PEG Buffer Length [Auto]PEG Buffer Length [Auto]
PEG Buffer Length [Auto]PEG Buffer Length [Auto]
PEG Buffer Length [Auto]
Allows you to set the PCI Express graphics buffer length. For optimum
performance, set this item to Auto.
Configuration options: [Auto] [Long] [Short]
Setting to [Fastest] may cause your system to be unstable. If this
happens, revert to [Auto].