User's Manual

4-304-30
4-304-30
4-30
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setup
4.4.64.4.6
4.4.64.4.6
4.4.6
ChipsetChipset
ChipsetChipset
Chipset
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specific Help
Press [Enter] to set.
Chipset
LDT Frequency [4x]
Memory Timing Configuration
Phoenix-Award BIOS CMOS Setup Utility
Advanced
Enhanced C1 (C1E) [Auto]
When set to [Auto], the BIOS will automatically check the CPU’s
capability to enable the C1E support. In C1E mode, the CPU power
consumption is lower when idle. This item appears only when you
install a processor with the Enhanced C1 feature.
Configuration options: [Auto] [Disabled]
Execute Disable Bit [Enabled]
When disabled, the processor forces the XD feature flag to always
return 0. Configuration options: [Disabled] [Enabled]
Intel(R) SpeedStep Technology [Auto]
Allows you to use the Enhanced Intel SpeedStep
®
Technology. When
set to [Auto], you can adjust the system power settings in the
operating system to use the EIST feature. Set this item to [Disabled]
if you do not want to use the EIST.
Configuration options: [Auto] [Disabled]
Hyper-Threading Technology [Enabled]
Enables or disables the Intel
®
Hyper-Threading Technology feature.
Configuration options: [Disabled] [Enabled]
LDT Frequency [4x]LDT Frequency [4x]
LDT Frequency [4x]LDT Frequency [4x]
LDT Frequency [4x]
Sets the Lightning Data Transport (LDT) frequency multiplier.
Configuration options: [1x] [2x] [3x] [4x] [5x] [3.5x]